I found that if you try to run both usb0 and mwlan0 udhcpc will cause one or
both interfaces to stop working.
The line in /usr/share/udhcpc/default.script that looks like:
ip route flush dev $interface
is the culprit. Commenting out that line will allow both interfaces to
work. I'm using version 1161.
Someone ran into this problem a while back, but I can't locate the message.
There is also a problem with udhcpc and the bootpd on OS X. It looks like
udhcpc sends a broadcast packet with
a length of 590. For some reason bootpd doesn't like the extra padding and
doesn't respond. I'll have a go at fixing