From: Jean-Paul v. de P. <jea...@ey...> - 2007-08-31 18:06:34
|
Hello, Anyway I can find out what goes wrong if my verdex stops at "Starting = kernel ..." I tried a different kernel with some debugging enabled, but that does = not show more. Thanks, Jean-Paul |
From: Craig H. <cr...@gu...> - 2007-08-31 18:24:37
|
On Aug 31, 2007, at 11:06 AM, Jean-Paul van de Plasse wrote: > Anyway I can find out what goes wrong if my verdex stops at > "Starting kernel ..." > I tried a different kernel with some debugging enabled, but that > does not show more. Do you have the "console=ttyS0,115200n8" in your u-boot's bootargs? If not, then it's probably running just fine, you're just not seeing any output because it's not being sent to the serial port. If you wait a while, and still have the getty on ttyS0 in /etc/inittab, then eventually you'll get a login prompt. C |
From: Jean-Paul v. de P. <jea...@ey...> - 2007-08-31 18:34:32
|
Hi, Yes it has the console line. Even if I wait an hour it will not show anything. It is btw due to my own fault, before it did boot but the dhcp did not = work, after some attempts due to underknowledgement on my side I seem to = have broke something (hardware wise?) But since I just got the console-vx today and was suprised it does show = uboot and things actually seem ok. So figured I could get it working but it does not tell me what is wrong. My guess is that out of some frustration I was not carefull enough last = time and damaged the ram orso, just would be nice to know for sure.. The mtest shows no error it seems.. And I can load a kernel over nfs. Any clues/ideas are more then welcome, never really got to use this = verdex... Thanks, Jean-Paul ----- Original Message -----=20 From: Craig Hughes=20 To: General mailing list for gumstix users.=20 Sent: Friday, August 31, 2007 8:24 PM Subject: Re: [Gumstix-users] verdex stops at starting kernel... On Aug 31, 2007, at 11:06 AM, Jean-Paul van de Plasse wrote: Anyway I can find out what goes wrong if my verdex stops at = "Starting kernel ..." I tried a different kernel with some debugging enabled, but that = does not show more. Do you have the "console=3DttyS0,115200n8" in your u-boot's bootargs? = =C2 If not, then it's probably running just fine, you're just not seeing = any output because it's not being sent to the serial port. =C2 If you = wait a while, and still have the getty on ttyS0 in /etc/inittab, then = eventually you'll get a login prompt. C -------------------------------------------------------------------------= ----- = -------------------------------------------------------------------------= This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a = browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ -------------------------------------------------------------------------= ----- _______________________________________________ gumstix-users mailing list gum...@li... https://lists.sourceforge.net/lists/listinfo/gumstix-users |