From: Jeremy Marschke <j253m@en...> - 2007-01-05 20:37:31
According to the wiki: "if you're getting a bluetooth gumstix, then
you don't need a serial board like a tweener, since bluetooth is started
by default with a getty on an rfcomm serial port, so you can log in over
a serial-over-bluetooth connection." How does one do this? I have tried
very hard to establish a connection, but I am unable to even find the
gumstix as a bluetooth device. I am still using a RS232 (COM/UART)
serial to bluetooth plug from free2move
(http://www.free2move.se/prod_spp.shtml) which I wish to be able to
communicate with the 400xm-bt via bluetooth.
If the wiki is incorrect, and this is impossible (as I am beginning
to suspect), is there a way to establish an initial connection using
only a roboAudioStix and a connex 400xm-bt, or must I order a tweener?
The site I pulled the quote from is:
I am extremely noobish, so a "for dummies" type response would be
much appreciated, as this is my first ever attempt to connect to any
Thanks very much,
Aerospace Researcher, University at Buffalo
Get latest updates about Open Source Projects, Conferences and News.