Red Hat Linux
Click URL instructions:
Right-click on ad, choose "Copy Link", then paste here →
(This may not be possible with some types of ads)
You seem to have CSS turned off.
Please don't fill out this field.
Briefly describe the problem (required):
Please provide the ad click URL, if possible:
Hi All, I'm a newbie on Linux and just obtained a Gumstix Overo FE.
I'm trying to update the gumstix with the latest stable release from
using the 'boot.scr' script from
I copied the MLO first, followed by u-boot.bin and uImage to the FAT
i also copied the following files to the FAT partition as per script
same MLO as x-load-new
same u-boot.bin as u-boot-new.bin
same uImage as uimage-new
My bootable 8GB SDHC card is from gumstix and has the following parameters.
H=255, S=63, C=967 <-- rounded down from 967.589 or should I round it up to
1GB FAT partition and remaining is EXT3.
Gumstix booted successfully from the SD card and executed the flashing
according to the boot.scr with the SUCCESS message.
I proceed to shutdown the machine and took out the SD card.
Power up but the machine will not load the kernel.
Giving a Warning of Bad CRC and stop at the prompt Overo#.
Can someone guide me and point out if I missed anything or the wiki is
missing some instructions.
Thanks in adv.
View this message in context: http://old.nabble.com/-Help-Reflashing-Overo-using-U-Boot-script-failed-with-Bad-CRC-tp31739306p31739306.html
Sent from the Gumstix mailing list archive at Nabble.com.