From: Johannes Karlsson <johannes.karlsson@tf...> - 2010-02-17 13:16:11
After applying the SDIO IRQ patch on the 2.6.32 kernel i get the following
libertas: command 0x0006 timed out
libertas: requeueing command 0x0006 due to timeout (#1)
Seems like other get the same error on different hardware platform
> With respect to WiFi speed on Overo. Investigation is ongoing. Others have
> confirmed throughput of 14Mbps+ on other OMAP3 based solutions with
> Marvell 8686 on SDIO interface. This gives me confidence that it's
> possible, however I have not seen, nor heard from anyone, that more than
> 1Mbps on Overo is possible. I haven't insufficient evidence to suggest a
> HW issue but I'm concerned that Overo is not matching other "like"
> Has anyone actually reached over 1Mbps throughput? If so, what was
> Interestingly, have also found that if you flood ping the Overo (ping -f)
> then I'm seeing a 15% loss of packets. Again, not good !
View this message in context: http://old.nabble.com/Overo-wifi-speed-and-WPA2-connection-issue-tp27196711p27622416.html
Sent from the Gumstix mailing list archive at Nabble.com.