From: Sandor Nagy <nagy.sandor3@fr...> - 2008-11-04 18:17:19
I am using the GPSstix with NEO-4S module. According to the schematic the
timepulse signal is connected to the SDATA_IN1 pin of the processor.
According to the NTP documentation, the ntpd is expecting the pps signal on
the DCD pin of the serial port (or the ACK pin of the paralell port). I am
using a connex-400xm card, a netCF and a GPSstix trio.
The current situation: the NMEA driver is working fine with the NMEA
sentences, but I would like to use the pps signal also.
My questions are:
How can I tell the ntpd to find the pps signal on the SDATA_IN1 pin?
Where should I connect the pps signal to use it? (unfortunatelly the DCD pin
of the FFUART is not in the hirose connector)
Thanks for your help.
View this message in context: http://www.nabble.com/GPSstix-PPS-problem-tp20327591p20327591.html
Sent from the Gumstix mailing list archive at Nabble.com.