From: skrew <sk...@ro...> - 2006-12-12 16:50:49
|
Hi, I had read then Tips page for freeing the ttyS0 but with no luck . Same about searching on this list. How i can identify the fault ? u-boot are on silent mode, with console=null in arg. in inittab, there are not getty anyway i can use my modem with ttyS2 but not ttyS0 (debug port) and i need 2 serial ports cat /proc/tty/driver/PXA\ serial serinfo:1.0 driver revision: 0: uart:FFUART mmio:0x40100000 irq:15 tx:465 rx:0 RTS|CTS|DTR|DSR|CD|RI 1: uart:BTUART mmio:0x40200000 irq:14 tx:56 rx:0 2: uart:STUART mmio:0x40700000 irq:13 tx:117424 rx:20039 3: uart:HWUART mmio:0x41600000 irq:0 tx:53 rx:0 RTS|CTS|DTR cat /proc/tty/drivers /dev/tty /dev/tty 5 0 system:/dev/tty /dev/console /dev/console 5 1 system:console /dev/ptmx /dev/ptmx 5 2 system PXA serial /dev/ttyS 4 64-67 serial pty_slave /dev/pts 136 0-1048575 pty:slave pty_master /dev/ptm 128 0-1048575 pty:master Thanks ! |