Is there anyone who attached an TFT LCD to gumstix-f succesfully?
Actually, I am looking for a daughter board solution for hirose
connector to use LCD, serial port, power input, and audio output.
This may be (if it is possible) just cable based solution (I attached an
to the mail, you can see a cable solution sample which marked with red pen.
source: http://www.hirose-connectors.com/products/DF1_5.htm ).
Waysmall does not present a tft lcd support. And, we have not enough
know-how to design a daughter board customly for our project.
From: David Farrell <davidjf2001@ya...> - 2004-09-15 13:29:34
--- Kaan Erdemir <kaane@...> wrote:
> Hi all,
> Is there anyone who attached an TFT LCD to
> gumstix-f succesfully?
I have not yet, but it is in my plan.
> This may be (if it is possible) just cable
> based solution (I attached an
I depends on the LCD, if it is 5V you may need
> to the mail, you can see a cable solution
> sample which marked with red pen.
I have used flex circuits with this type of
connector, but I think a board is less expensive.
The gumstix is small enough to have the tranition
from gum to adapte and adapter to lcd be the same
board, that is mount the gumstix to the lcd.
Get latest updates about Open Source Projects, Conferences and News.