From: Suriyan L. <sur...@gm...> - 2007-12-15 15:10:29
|
Hi All, I've tested Verdex XM4-bt with only ConsoleLCD-vx + Samsung LCD, it's work properly. Then I've assembled with netCF-vx, it doesn't boot, no any boot message appear in console. I've found a few recently topics in this mailing list which may related to my problem (i.e. Verdex XM4 w/ NetWIFIuSD) > From: Brent Russell <brent <at> arl.co.nz> > Subject: Verdex XM4 w/ NetWIFIuSD > After a bit of fiddling I discovered that turning them on, followed by a > very quick power cycle will get them to boot. Looking at the cards the only > difference that I can see is that the bidirectional buffer has been changed > from a WB4245 to a WBH4245. Board revisions are otherwise identical. FYI, my netCF-vx board also use WBH4245 but after many times very quick power cycle, I never seen any boot message. > Of course there might be some other cause all-together, but it certainly is > clear that the latest NetWIFIuSD batch has a problem. Has anyone know how Gumstix feedback about this issue? or how to workaround? Regards, Suriyan. |