I am currently connecting a 7" touch screen to my tobi through HDMI cable.
This touch screen is detected as eGalax.
When I do:
*$ less /proc/bus/input/devices*
*I: Bus=0003 Vendor=0eef Product=0001 Version=0100
N: Name="eGalax Inc. Touch"
H: Handlers=mouse1 event2
B: KEY=400 0 0 0 0 0 0 0 0 0 0
*$ ls /dev/input*
*by-id by-path event0 event1 event2 evtouch_event mice mouse0 mouse1*
I followed below website to do the calibration, but I don't understand the
step 5, which is "Build calibrator.c".
Can anyone tell me how to build this calibrator.c file in gumstix, please?
And another question: because i am not sure about step 5 above, I skipped
this step, and do the calibration straight away by using command
"ts_calibrate". I found the cursor was flying around. It didn't go to the
coordination where I pointed to.
Thanks in advance for anyone who can give me a hint :)
View this message in context: http://gumstix.8.n6.nabble.com/HDMI-Touch-screen-Calibration-tp4642122p4642122.html
Sent from the Gumstix mailing list archive at Nabble.com.
Get latest updates about Open Source Projects, Conferences and News.