OK, just so that i am certain i did everything that needed to be done in =
order to have tinyx and the touchscreen working here are the steps i =
Please correct me if i am wring in any way.
go to linux-2.5.15gum
in -> input devices enable UCB1400 as a module
cd to build_arm_nofpu/package and extract the TSLIB there
add the tslib to the paths
then the tinyx version that is included in the build root is
not compatible with the evdev module, replace the
ts.c in the directory
the one already there.
(the file is attached )
after that edit the Makefile in
and edit the line "EXTRASYSLIBS =3D" with "EXTRASYSLIBS =3D=20
then cd to gumstix-buildroot
copy the jffs2 image to gumstix
then do this lines on Gumstix
(as a result i will get a device which shows up under /dev/input/*)
So after this i should see the Tinyx with a working touchscreen?
If i missed any Make clean or any commands then please correct me cause =
follow this like it is then i just get the tinyx with an X in the middle =
which is not mooving and an error when the tinyx starts saying"killall:=20
Xfbdev: no process killed"
Get latest updates about Open Source Projects, Conferences and News.