Ash,

This is the contents of hte images directory,

drwxr-xr-x 3 sean sean     4096 2010-03-16 07:57 .
drwxr-xr-x 3 sean sean     4096 2010-03-11 22:47 ..
-rw-r--r-- 1 sean sean 30658608 2010-03-11 23:00 Angstrom-verdex-console-image-glibc-ipk-2009.X-test-20100311-gumstix-verdex.rootfs.jffs2
-rw-rw-r-- 1 sean sean 25091897 2010-03-11 23:00 Angstrom-verdex-console-image-glibc-ipk-2009.X-test-20100311-gumstix-verdex.rootfs.tar.gz
drwxrwxr-x 2 sean sean     4096 2010-03-11 23:04 Angstrom-verdex-console-image-glibc-ipk-2009.X-test-20100311-gumstix-verdex-testlab
-rw-rw-r-- 1 sean sean  2312891 2010-03-11 22:47 modules-2.6.31-r0-gumstix-verdex.tgz
-rw-r--r-- 1 sean sean  1312592 2010-03-11 22:47 uImage-2.6.31-r0-gumstix-verdex.bin
lrwxrwxrwx 1 sean sean       35 2010-03-11 22:47 uImage-gumstix-verdex.bin -> uImage-2.6.31-r0-gumstix-verdex.bin
lrwxrwxrwx 1 sean sean       88 2010-03-11 23:00 verdex-console-image-gumstix-verdex.jffs2 -> Angstrom-verdex-console-image-glibc-ipk-2009.X-test-20100311-gumstix-verdex.rootfs.jffs2
lrwxrwxrwx 1 sean sean       89 2010-03-11 23:00 verdex-console-image-gumstix-verdex.tar.gz -> Angstrom-verdex-console-image-glibc-ipk-2009.X-test-20100311-gumstix-verdex.rootfs.tar.gz

So it looks like my uImage file is still biulding 2.6.31 ...

I did rerun mkfs.vfat on the fat partition and recopy over the file and I am still getting the following:

U-Boot 1.2.0 (May 10 2008 - 21:17:19) - PXA270@400 MHz - 1604

*** Welcome to Gumstix ***

DRAM:  64 MB
Flash: 16 MB
Using default environment

Hit any key to stop autoboot:  0
GUM> mmcinit
No MMC card found
GUM> mmcinit
Unknown command 'mmcinit' - try 'help'
GUM> mmcinit
Detected: 1927168 blocks of 1024 bytes (1882MB) SD card.
Vendor: Man 02 OEM TM "SA02G" Date 08/2009
Product: 2622295989
Revision: 0.3
GUM> fatload mmc 0 a2000000 uimage
reading uimage

1312592 bytes read
GUM> setenv bootargs console=/dev/ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootdelay=1
GUM> boot
Instruction Cache is ON
Copying kernel to 0xa2000000 from 0x00f00000 (length 0x00100000)...done
## Booting image at a2000000 ...
   Image Name:   Angstrom/2.6.21/gumstix-custom-v
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    933768 Bytes = 911.9 kB
   Load Address: a0008000
   Entry Point:  a0008000
OK

Starting kernel ...

===================================================

I did have an old custom image that I did build from a  non-GIT OE environment in November, but if we are loading the uimage from the SD Card, shouldn't that supersede what's on the Gumstix?

Thanks,

Sean