Hi all,
I am trying to park the Gumstix BT node but I am facing few problems...
This is the hciconfig -a output of my Master device

// Master
# hciconfig -a
hci0:   Type: UART
        BD Address: 00:80:37:2E:4C:C3 ACL MTU: 339:11 SCO MTU: 93:14
        UP RUNNING PSCAN ISCAN
        RX bytes:152425 acl:2402 sco:0 events:10389 errors:0
        TX bytes:87079 acl:2791 sco:0 commands:3526 errors:0
        Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
        Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
        Link policy: RSWITCH HOLD SNIFF PARK
        Link mode: SLAVE ACCEPT
        Name: 'LB:[unknown]'
        Class: 0x820116
        Service Classes: Networking
        Device Class: Computer, Palm
        HCI Ver: 2.0 (0x3) HCI Rev: 0x62b9 LMP Ver: 2.0 (0x3) LMP Subver: 0x62b9
        Manufacturer: Infineon Technologies AG (9)

Slave has the same configuration and its Link policy is also   Link policy: RSWITCH HOLD SNIFF PARK

These is the output of hcitool con
# hcitool con
Connections:
        < ACL 11:11:11:11:11:11 handle 512 state 1 lm MASTER
        < ACL 00:80:37:2E:45:1E handle 256 state 1 lm MASTER

# hcitool cmd 0x02 0x005 0x0200 0x0090 0x000E
< HCI Command: ogf 0x02, ocf 0x0005, plen 3
  00 90 0E
> HCI Event: 0x0f plen 4
  12 01 05 08

# hcitool cmd 0x02 0x005 0x0100 0x0090 0x000E
< HCI Command: ogf 0x02, ocf 0x0005, plen 3
  00 90 0E
> HCI Event: 0x0f plen 4
  12 01 05 08

By searching into mailing list archieve ( link : http://article.gmane.org/gmane.linux.bluez.devel/269/match=park )
I came to know that may be my parameters are wrong but I am not able to understand what is wrong ..

Is there any one who has parked a gumstix ....

Thanks in advance for any help/suggestion/links...







Best Regards,
Mahin Gupta.