Ahh – didn’t think to look
under there. On the real thing you can’t see those numbers when the black
flex retention clip open.
[mailto:firstname.lastname@example.org] On Behalf Of Don Anderson
Sent: Monday, March 31, 2008 4:11
mailing list for gumstix users.
Subject: Re: [Gumstix-users]
ConsoleLCD-vx versus ConsoleLCD16-vx
To determine the
consoleLCD board (18 bpp) from the consoleLCD16-vx (16 bpp), look at the
version numbers written on the top of the boards because the PCB number can be
On Mon, Mar 31, 2008 at 6:34 AM, Marc Humphreys <email@example.com>
Hmm. I have both too. Not easy. Since I have double sided tape on the
of both here's one thing you can look at on the top layer.
Orientation: with connector side up and 3 - 8 pin circular connectors
running left to right along the top of the board.
Find resistor pack RP3 just above the lcd flex connector.
The lcd16 has 4 surface traces coming from RP3 and circling around to the
left between RP3 and RP2 down to the X2 (LCD) flex) connector.
On the lcd18 you can only see 3 traces in the same vicinity.
Not very technical - it would have been easier if the "console-vx"
silkscreen below the flex connector had been changed in order to more easily
identify and differentiate the 2.