Hey guys,

I opened a new Stagecoach and two Gumstix Overo Air COMs today.  I placed a Gumstix COM into slot #1 on the Stagecoach, used minicom to setup ttyUSB0 comms, and everything worked great.  I assigned this COM a static IP address.  Then, I placed this COM into a different slot.  I was able to SSH into the COM using that static IP address.  Everything is working great.  But now I place a new Gumstix COM into slot #1, and I get the following message:

Board revision: 1
Loading u-boot.bin from nand
u-boot.bin not found or blank nand contents - attempting serial boot 
## Ready for binary (kermit) download to 0x80008000 at 115200 bps...

Does the Stagecoach slot #1 expect there to be NAND contents from the COM because I already plugged in and configured a different COM on this slot?  I don't seem to be able to use the ttyUSB0 connection on any other slot, so I feel like I am stuck.