Thanks. I found that before posting here. I don't have ethtool and I don't know where to get it. It's not present on my system and not in Linaro's package repositories.

Jason


On Wed, Oct 23, 2013 at 11:54 PM, Adam Reynolds <suicidaleggroll@gmail.com> wrote:
This thread has instructions for setting the MAC in the EEPROM

http://gumstix.8.x6.nabble.com/MAC-Address-td4512973.html

-Adam


On 10/23/2013 09:42 PM, Jason Cipriani wrote:
I have a Gumstix Overo WaterSTORM COM, running a Linaro setup off an SD card. It is using the smsc911x ethernet driver.

I want to set the first ethernet interface's MAC address on boot, not via /etc/network/interfaces.

I can set u-boots ethaddr environment variable. However, when I do this, I get the following message on boot:

Net:   smc911x-0
Warning: smc911x-0 MAC addresses don't match:
Address in SROM is         00:15:c9:28:fe:08
Address in environment is  fa:fa:fa:11:22:11

Then the SROM address is used.

I want to use the address from the environment (or have the driver read the environment instead of the SROM).

How do I do this? How can I reprogram the EEPROM with an explicitly chosen MAC address?

Thanks,
Jason


------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from 
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk


_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users


------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users