I would appreciate if some body could post the instructions for booting " 2.6.37 kernel + SGX v 1.7  + Android-2.3.4" on overo, or at least point to any existing ones. That would save a lot of time for the other like me trying to do the same.

Thanks,
--Krishna/. 


On Fri, Jul 15, 2011 at 3:15 PM, Manish Shakya <manishshakya.nd@gmail.com> wrote:
Now 2.6.37 kernel + SGX v 1.7  + Android-2.3.4  is up and running in Overo Fire Gumstix. Touch screen in not running though.

Increasing memory solved surface flinger problem. Got help from this thread
http://groups.google.com/group/rowboat/browse_thread/thread/6e6d7fa1f14add58/e9ed143e7e9d0676?pli=1

I  suggest to put all the things in WIKI.

Thanks guys


On Fri, Jul 15, 2011 at 4:25 PM, Manish Shakya <manishshakya.nd@gmail.com> wrote:
Amit,

Can you send me link of the thread that notifies all the necessary changes?

Right now, libaudio and surface flinger is crashing. I am planning to use AUDIO stub and increase size of the mem in uboot.
I know I am almost there.



On Fri, Jul 15, 2011 at 2:41 PM, Amit Pundir <pundiramit@gmail.com> wrote:
Yes I agree that it should have clearly been put in the wiki.

But I remember that the day Rowboat introduced 2.6.37 kernel branch, a
mail was put on Rowboat mailing list notifying all these necessary
changes.

Regards,
Amit Pundir


On 7/15/11, Manish Shakya <manishshakya.nd@gmail.com> wrote:
> Thanks got it.
>
> I think, this changes should be wrote in rowboat wiki. I wasted 2/3 days.
>
>
> On Fri, Jul 15, 2011 at 2:04 PM, hedwin <hedwin.koning@gmail.com> wrote:
>
>> its in omap-serial.h in arch/arm/plat-omap/include/plat
>>
>>
>> On Fri, Jul 15, 2011 at 7:58 PM, Manish Shakya
>> <manishshakya.nd@gmail.com>wrote:
>>
>>> Thanks.Yes, you were right.  I tried replacing with O with S. Now I can
>>> see logs in the console.
>>>
>>> Can you tell me where in the source code it says use ttyO instead of
>>> ttyS?
>>> I couldn't find in the source.
>>>
>>> Manish
>>> On Fri, Jul 15, 2011 at 11:53 AM, Manish Shakya <
>>> manishshakya.nd@gmail.com> wrote:
>>>
>>>>
>>>> What do you mean?
>>>>
>>>> so now uboot  args should look something like this
>>>> console=ttyS2,115200n8 androidboot.console=ttyO2 root=/dev/mmcblk0p2 rw
>>>> rootfstype=ext3 rootwait init=/init vram=12M
>>>> omapfb.mode=dvi:480x272MR-16@
>>>> 60 omapdss.def_disp=lcd43
>>>>
>>>> Is this change in gingerbread 2.3.4 only?
>>>>
>>>> Manish
>>>>
>>>>
>>>> On Fri, Jul 15, 2011 at 11:48 AM, hedwin <hedwin.koning@gmail.com>wrote:
>>>>
>>>>> in gingerbread ttyS changed to ttyO
>>>>>
>>>>> Hedwin
>>>>>
>>>>>
>>>>> On Fri, Jul 15, 2011 at 5:44 PM, Manish Shakya <
>>>>> manishshakya.nd@gmail.com> wrote:
>>>>>
>>>>>> Right now I am trying to move from linux kernel 2.6.32 to 2.6.37 and
>>>>>> use gingerbread 2.3.4.
>>>>>>
>>>>>> With linux kernel 2.6.32, froyo and gb 2.3.3 are working fine. I used
>>>>>> same uboot arg as in earlier mail.
>>>>>>
>>>>>> On Fri, Jul 15, 2011 at 11:22 AM, hedwin
>>>>>> <hedwin.koning@gmail.com>wrote:
>>>>>>
>>>>>>> Do you use froyo or gingerbread?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Jul 15, 2011 at 3:57 PM, manish shakya
>>>>>>> <mshakya@oakland.edu>wrote:
>>>>>>>
>>>>>>>> Yes, Both console and android.console is pointing to correct serial
>>>>>>>> device i.e. ttyS2.
>>>>>>>>
>>>>>>>> My uboot args is
>>>>>>>>
>>>>>>>> console=ttyS2,115200n8 androidboot.console=ttyS2 root=/dev/mmcblk0p2
>>>>>>>> rw rootfstype=ext3 rootwait init=/init vram=12M
>>>>>>>> omapfb.mode=dvi:480x272MR-16@60 omapdss.def_disp=lcd43
>>>>>>>>
>>>>>>>> Isn't this correct?
>>>>>>>>
>>>>>>>>
>>>>>>>> On Fri, Jul 15, 2011 at 5:44 AM, hedwin <hedwin.koning@gmail.com>
>>>>>>>> wrote:
>>>>>>>> >
>>>>>>>> > Check if console and android.console point to the correct serial
>>>>>>>> device.
>>>>>>>> > Both a kernel parameters sent by u-boot.
>>>>>>>> >
>>>>>>>> > Cheers,
>>>>>>>> >
>>>>>>>> > Hedwin
>>>>>>>> >
>>>>>>>> > On Thu, Jul 14, 2011 at 9:45 PM, Manish Shakya <
>>>>>>>> manishshakya.nd@gmail.com> wrote:
>>>>>>>> >>
>>>>>>>> >> Hi ,
>>>>>>>> >>
>>>>>>>> >> I am wondering what are the changes to be made if I have to make
>>>>>>>> to port rowboat to gumstix overo module.
>>>>>>>> >>
>>>>>>>> >> I did following things but it didn't worked. :-(
>>>>>>>> >> I made change in config file , board-overo.c and also added LCD
>>>>>>>> driver. Compilation went fine with out errors.
>>>>>>>> >> But when I tried to run the image. It show following log and gets
>>>>>>>> stuck.
>>>>>>>> >>
>>>>>>>> >> 2731240 bytes read
>>>>>>>> >> ## Booting kernel from Legacy Image at 82000000 ...
>>>>>>>> >>    Image Name:   Linux-2.6.37-g06ebbba
>>>>>>>> >>    Image Type:   ARM Linux Kernel Image (uncompressed)
>>>>>>>> >>    Data Size:    2731176 Bytes = 2.6 MiB
>>>>>>>> >>    Load Address: 80008000
>>>>>>>> >>    Entry Point:  80008000
>>>>>>>> >>    Verifying Checksum ... OK
>>>>>>>> >>    Loading Kernel Image ... OK
>>>>>>>> >> OK
>>>>>>>> >>
>>>>>>>> >> Starting kernel ...
>>>>>>>> >>
>>>>>>>> >> Uncompressing Linux... done, booting the kernel.
>>>>>>>> >>
>>>>>>>> >>
>>>>>>>> >> --
>>>>>>>> >> Manish Shakya
>>>>>>>> >> http://www.manishshakya.com.np
>>>>>>>> >>
>>>>>>>> >> --
>>>>>>>> >> unsubscribe: android-porting+unsubscribe@googlegroups.com
>>>>>>>> >> website: http://groups.google.com/group/android-porting
>>>>>>>> >
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>>
>>>>>>>> Manish Shakya
>>>>>>>> http://www.manishshakya.com.np
>>>>>>>> http://secs.oakland.edu/~ganesan/iMX/
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Manish Shakya
>>>>>> http://www.manishshakya.com.np
>>>>>> http://secs.oakland.edu/~ganesan/iMX/
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Manish Shakya
>>>> http://www.manishshakya.com.np
>>>> http://secs.oakland.edu/~ganesan/iMX/
>>>>
>>>
>>>
>>>
>>> --
>>> Manish Shakya
>>> http://www.manishshakya.com.np
>>> http://secs.oakland.edu/~ganesan/iMX/
>>>
>>
>>
>
>
> --
> Manish Shakya
> http://www.manishshakya.com.np
> http://secs.oakland.edu/~ganesan/iMX/
>
> --
> unsubscribe: android-porting+unsubscribe@googlegroups.com
> website: http://groups.google.com/group/android-porting
>



--



--

------------------------------------------------------------------------------
AppSumo Presents a FREE Video for the SourceForge Community by Eric
Ries, the creator of the Lean Startup Methodology on "Lean Startup
Secrets Revealed." This video shows you how to validate your ideas,
optimize your ideas and identify your business strategy.
http://p.sf.net/sfu/appsumosfdev2dev
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users