This what I got with the SD Card inserted:

** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
� tصb� $U
             @ @ @QT,0@ @ @

Texas Instruments X-Loader 1.5.1 (Mar  8 2012 - 23:16:04)
OMAP3530-GP ES3.1
Board revision: 1
Reading boot sector
Loading u-boot.bin from mmc

U-Boot 2011.09 (Feb 29 2012 - 05:36:13)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
Gumstix Overo board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  512 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Board revision: 1
Direct connection on mmc2
No EEPROM on expansion board
Die ID #
Net:   smc911x-0
Hit any key to stop autoboot:  0
reading boot.scr

It keeps looping indefinitely!!

Same applies to dsp image

On Thu, Apr 5, 2012 at 6:57 PM, zoso1234 [via Gumstix] <[hidden email]> wrote:
Well I don't have much experience with flashing personally I'd say yes. It's pretty easy doing sd card i think..just put the files on (in correct order) then do what I wrote above or whatever your normal boot up procedure is..then power on and boom your up and running. I use the waterstorm so I have to use different MLO than you I think for water...but I would say get a prebuilt image first..put it on your card..then when you get chance stop boot procedure(hit a button when countdown starts..) then do the nand erase command...sometimes your u-boot environment can not be set up right and sometimes they are not set up right to begin with. This is only what I do..and maybe its not the best way for you and considering I've only been at this for a couple of months there might be a better way

If you reply to this email, your message will be added to the discussion below:
To unsubscribe from Newb: have I killed my Overo Water?, click here.

OMAP3.png (134K) Download Attachment

View this message in context: Re: Newb: have I killed my Overo Water?
Sent from the Gumstix mailing list archive at