This what I got with the SD Card inserted:

** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
             @ @ @QT,0@ @ @

Texas Instruments X-Loader 1.5.1 (Mar  8 2012 - 23:16:04)
OMAP3530-GP ES3.1
Board revision: 1
Reading boot sector
Loading u-boot.bin from mmc

U-Boot 2011.09 (Feb 29 2012 - 05:36:13)

OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz
Gumstix Overo board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  512 MiB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Board revision: 1
Direct connection on mmc2
No EEPROM on expansion board
Die ID #647600040000000004037f660700700a
Net:   smc911x-0
Hit any key to stop autoboot:  0
reading boot.scr

It keeps looping indefinitely!!

On Thu, Apr 5, 2012 at 5:52 PM, zoso1234 [via Gumstix] <[hidden email]> wrote:
Step me through what you do for boot..
-take mountable sd card- put mlo,u-boot.bin,uImage on boot and untar image onto rootfs part
what is your next you have tobi board? what are you plugging into..console usb to your desktop?
if so
then what I do is:
kermit -l /dev/ttyUSB0
set flow-control none
set carrier-watch off
set speed 115200

then plug power into gumstix

If you have not done this before I would start with prebuilt image just so you know for sure that it will work..then I would move on to your own image..

If you reply to this email, your message will be added to the discussion below:
To unsubscribe from Newb: have I killed my Overo Water?, click here.

OMAP3.png (134K) Download Attachment

View this message in context: Re: Newb: have I killed my Overo Water?
Sent from the Gumstix mailing list archive at