Hi,

I did some playing with 1wire a while (over a 1 year) ago, but did not get too far using overo's own 1-wire bus master. Last time I tried, the w1 kernel driver did not support 1-wire mode, only HDQ.
In the end I went with a USB 1-wire master (http://www.hobby-boards.com/catalog/product_info.php?products_id=1503), which works nicely with owfs. I had a couple of DS1810s and HIH-4021 -based humidity sensors hooked, read their values every minute and produced graphs with rrdtool with an Overo Earth + Chestnut43 combo.
I also have a 8-port hub kit that I yet have to assemble, but the project got downprioritised lately...
Haven't given up on the w1 driver though, I'm planning to have a go at the 3.x kernel series to check if things have improved.

br,
Ors


On Tue, Dec 6, 2011 at 5:09 PM, Ash Charles <ash@gumstix.com> wrote:
Hey Jesse,

On Fri, Dec 2, 2011 at 5:48 PM, Jesse Lackey <jesse@celestialaudio.com> wrote:
> Would anyone from gumstix like to demonstrate the functionality of this
> advertised feature?  I'm not finding much documented.
I haven't personally tried 1-wire however I'd be interested in finding
a simple usage that I can use as a test for this function.  If you've
got something in mind that fits the bill, let me know.
-Ash

------------------------------------------------------------------------------
Cloud Services Checklist: Pricing and Packaging Optimization
This white paper is intended to serve as a reference, checklist and point of
discussion for anyone considering optimizing the pricing and packaging model
of a cloud services business. Read Now!
http://www.accelacomm.com/jaw/sfnl/114/51491232/
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users