If used both code sourcery and the generated arm-angstrom... files and found no difference with the simple program I made, but Im sure there would be a preferred method, I just dont know the answer.

As far as eclipse goes, you need CDT. Using ubuntu 10.4, I found it better to make a script to sudo eclipse, otherwise I cannot get it to function correctly.

I also used this as a reference:
http://krupets.com/index.php?option=com_content&view=article&id=18&Itemid=20

I have looked at this page, but have not tried it yet:
http://sourceforge.net/apps/mediawiki/gnuarmeclipse/index.php?title=Main_Page



From: Nick Wernicke [nick.wernicke@gmail.com]
Sent: Monday, November 05, 2012 10:53 AM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] TVP514X support on gumstix

I think you're right. 

New plan.  It sounds like Chris Whittenburg used the standard angstrom image you can bitbake with g-streamer and plugins. 

Then I would just need to cross compile the driver from the linuxtv repository and copy it over with ftp.  http://git.linuxtv.org/pinchartl/media.git 

I'll get started learning about eclipse.  Are there any tips or tricks to make eclipse compile stuff for the DM3730? Should I use the TI CCS5?


On Mon, Nov 5, 2012 at 10:09 AM, Richard Klosinski <rich@klo-group.com> wrote:
Nick,

I guess if you build with all the devel libs and tools, compiling on the gumstix is possible. All the cross tools are available when you bitbake the image.

Having said this, I've tried to cross compile using eclipse for a simple hello world app, and it worked fine using the tools generated by bitbake and using the free code sourcery ones. Where it failed is when I tried building the tvp514x.c driver. Way to many .h file referencing other .h files ..... still working on this through. 

getting eclipse set to cross compile was easy, then I just scp my output down to the humstix. 

From: Nick Wernicke [nick.wernicke@gmail.com]
Sent: Monday, November 05, 2012 10:02 AM

To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] TVP514X support on gumstix

Coincidentally, I'm investigating the DM3730 DVSDK from Texas Instruments on a DM3730 (IronSTORM) right now, trying to stream video in BT.656 mode from a TVP5150 on a custom baseboard.  Supposedly it is possible.
http://www.ti.com/tool/linuxdvsdk-dm37x

TI has tvp51xx drivers available in the arago project. 
http://www.arago-project.org/wiki/index.php/Main_Page

You need Codesourcery gnu eabi toolchain to bitbake arago recipes.

My plan is to try installing the dev kit on my DM3730, then compile the TVP5150 driver under the arago-codesourcery environment, and install it with insmod.  Hopefully I can use it as a video source with the TI-gstreamer plugins, and then add in my audio stream, compression, and send it out to the network.

That's about the extent of my experience with this.  I welcome any ideas or pointers you might have.



On Mon, Nov 5, 2012 at 6:35 AM, rklosinski <rich@klo-group.com> wrote:
Just purchased a e-CAMNT_35x_GSTIX from e-con systems. It has a pre-built
linux-2.6.32 and can display a image on a connected dvi panel. I need to
stream the image using gstreamer and have successfully built and used 2.6.34
and a caspa camera with gsteamer.

I also found the drivers in a number of places on the net for the tvp514x
(which the e-CAMNT-35X uses).

How to I get the drivers built into my 2.6.34 linux? e-con systems want
$6.4k to port the driver and I simply cannot afford that for this project.





--
View this message in context: http://gumstix.8.n6.nabble.com/TVP514X-support-on-gumstix-tp4965895.html
Sent from the Gumstix mailing list archive at Nabble.com.

------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users


------------------------------------------------------------------------------
LogMeIn Central: Instant, anywhere, Remote PC access and management.
Stay in control, update software, and manage PCs from one command center
Diagnose problems and improve visibility into emerging IT issues
Automate, monitor and manage. Do more in less time with Central
http://p.sf.net/sfu/logmein12331_d2d
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users