I probably should've gone to bed. Ha.
The good news is my rcX.d directories are correctly populating now.
I think the magic was in commit f09ff5683c9477b9a59f0f56264a2bafa8682a26 (verdex git repo.) Adding a dependency for update-rc.d-native.
Good morning gentlemen.

On Thu, May 13, 2010 at 3:56 AM, Jeff Roberts <jeffroberts1@gmail.com> wrote:
I'm having the same issue, did you get anywhere? I'm about to give up for the night and sleep on it. Boohoo.
Any help would be appreciated.


On Thu, Apr 29, 2010 at 10:51 AM, Anand Sivaram <aspnair@gmail.com> wrote:
After analyzing this problem, there are some more findings.
I could not see my /etc/rcS.d and /etc/rc5.d getting populated
properly with the exception of whatever mentioned from

For example for "udev", even though the package is getting built and
installed properly whatever listed by init script/update-rc.d is not
getting done.
INITSCRIPT_PARAMS = "start 03 S ."

Where as in the pre-built images by Steve, everything is popluated correctly.
Any clues?

On Wed, Apr 28, 2010 at 16:48, Anand Sivaram <aspnair@gmail.com> wrote:
> Greetings all,
> I am pretty new to gumstix.  I recently built an overo palmtop image using
> bitbake omap3-palmtop-image
> by following "Setting up a build environment" of the gumstix developer site.
> Since this image was not booting up correctly to the GPE, I decided
> to download and try a precompiled image,
> omap3-palmtop-image-overo-201004270808.tar.bz2
> After comparing the contents of both images, it looks like
> many of the softlinks of initialization scripts are missing
> in the custom built image.
> precompiled palmtop image:
> #ls /etc/rcS.d
> S01psplash    S12udev-cache            S38devpts.sh    S45mountnfs.sh
> S02banner     S20modutils.sh           S39alsa-state   S55bootmisc.sh
> S03sysfs      S30procps.sh             S39hostname.sh  S97blueprobe
> S03udev       S30ramdisk               S39ifup         S98configure
> S06alignment  S35mountall.sh           S40networking   S99finish.sh
> S10checkroot  S37populate-volatile.sh  S43portmap
> #ls /etc/rc5.d
> S02dbus-1     S20ntpd          S23bluetooth   S97atd
> S05syslog-ng  S20syslog        S30pvr-init    S99gpe-dm
> S20apmd       S21avahi-daemon  S50usb-gadget  S99rmnologin
> custom locally compiled palmtop image
> #ls /etc/rcS.d
> S02banner     S30ramdisk               S39hostname.sh  S98configure
> S03sysfs      S35mountall.sh           S45mountnfs.sh  S99finish.sh
> S06alignment  S37populate-volatile.sh  S55bootmisc.sh
> S10checkroot  S38devpts.sh             S97blueprobe
> #ls /etc/rc5.d
> S99rmnologin
> Is there anything missing here?  Do I need to include any other
> packages to the palmtop list?  Any help would be really appreciated.
> Thanks and Regards
> Anand

gumstix-users mailing list