Please note that the labeling for two pins on connector J1, as posted in the documentation section of gumstix.net, have been corrected.

-  Pin 8 was incorrectly labeled as GPIO127_TS_IRQ. Pin 8 is now correctly labeled as GPIO_10

- Pin 14 was incorrectly labeled as GPIO128_GPS_PPS. Pin 14 is now correctly labeled as GPIO_186


The posting of this information can be found here:
http://www.gumstix.net/Hardware/view/Motherboard-I/O/Connector-J1-for-Overo/112.html


Don
@ Gumstix
=========================