Hi Mark,
Any chance you could get a couple of pictures of the screen at work?

On 5/29/07, Heilpern, Mark <mark.heilpern@authentec.com> wrote:

I got the display to light up with recognizable data… it's far from good looking (or even usable), but it's recognizable.


The test program is a Qtopia demo application, "gradients". I've run this program against a VNC buffer to make sure it runs and it looks perfect in VNC – except the application is much larger than 240x160, so it might not be a good test case. The physical display shows the upper left of what I expect to see, and the colors are more or less what I expect… the problem is the screen has a large amount of horizontal jump, like a clock isn't at the right frequency… this leads to a fair amount of pixel bleed towards the right.


I set the registers according to the script at http://docwiki.gumstix.org/Display#Setting_up_the_Sony_ACX705AKM_on_gumstix.


From: gumstix-users-bounces@lists.sourceforge.net [mailto:gumstix-users-bounces@lists.sourceforge.net ] On Behalf Of Jozsef Lenart
Sent: Saturday, May 26, 2007 4:13 AM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] ACX705AKM display connection



2007/5/26, Fabio Miguez <fabiomiguez@gmail.com >:

Hi Mark,

How's this going?

I'm doing the same work with the same components too. Yesterday night i've wired the frontlight and it works (from 6V, 15mA). Hopefully today i'll do the rest and show some pictures on it.
Good luck!

NOTE: The information in this message is intended for the personal and confidential use of the designated recipient(s) named above. To the extent the recipient(s) is/are bound by a non-disclosure agreement, or other agreement that contains an obligation of confidentiality, with AuthenTec, then this message and/or any attachments shall be considered confidential information and subject to the confidentiality terms of that agreement.   If the reader of this message is not the intended recipient named above, you are notified that you have received this document in error, and any review, dissemination, distribution or copying of this message is strictly prohibited. If you have received this document in error, please delete the original message and notify the sender immediately.

Thank you.

 AuthenTec, Inc.  http://www.authentec.com


This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
gumstix-users mailing list

Fabio Miguez