That did the trick. The image is moving over like there is no tomorrow. Thanks for the help, Richard.
Perhaps a Wiki page discussing using VM, and the required settings?
[mailto:firstname.lastname@example.org] On Behalf Of Appleby, Richard
Sent: Tuesday, December 12, 2006 3:49 PM
Subject: Re: [Gumstix-users] Communicating with Gumstix
I had this problem also. You need to go into your VMWare settings for the serial port and there is a check box which yeilds the CPU on polling or some such. Check that, and you should then be able to flash using kermit.
[mailto:email@example.com] On Behalf Of
Sent: Wednesday, December 13, 2006 8:08 AM
Subject: [Gumstix-users] Communicating with Gumstix
I don’t know why this seems to be such a moving target, but here we go. The Buildroot has been downloaded, and configured for I2C communications within my Ubuntu VMWare environment. I have been able to communicate with my Gumstix via USBNet within my VMWare system using SSH. I can also communicate with the Gum using Hyperterm on my windows host system. But, for some lame fracking reason, I cant communicate with my Gum using ckermit (Hence cant update the file system and such). Here are my settings in my .kermrc file:
set line /dev/ttyS1
set flow-control none
set carrier-watch off
set speed 115200
set parity none
set prefixing all
set file type bin
set rec pack 4096
set send pack 4096
set window 5
I have tried /dev/ttyUSB0 along with ttyS1 – ttyS4 with similar results…. Nothing.