Hi I was trying to update my kernal from 2.6.16 to 2.6.18 and I ran into the PBA31308 vs PBA31307 problem
and my BlueTooth no longer works. Some one mentioned a fix but it was kinda vague. It told
me what to change in the bluez-something-something-PBA31308.patch (which I found) but not what to change it *to*...
can any one enlighten me? IIRC resp[6], resp[7] and resp[9] was mentioned. Does any one know what those values should be?
Here is the error:

Starting Bluetooth subsystem:Trying baud rate 57600...
Set (GPIO,out,clear) via /proc/gpio/GPIO7
Set (GPIO,out,set) via /proc/gpio/GPIO7
Got response after reset... gobbling
No response from BT module
Trying baud rate 921600...
Set (GPIO,out,clear) via /proc/gpio/GPIO7
Set (GPIO,out,set) via /proc/gpio/GPIO7
Got response after reset... gobbling
Error reading response: Success
Trying baud rate 115200...
Set (GPIO,out,clear) via /proc/gpio/GPIO7
Set (GPIO,out,set) via /proc/gpio/GPIO7
Got response after reset... gobbling
Detected bluetooth module at 115200 baud
Got: status=0x00, hci_ver=0x01, hci_rev=0x0750, lmp_ver=0x02, manuf=0x0009, lmp_subver=0x0750
Not a PBA31307

Thanks for the help!


--
        -Jesse W.