That error is saying that it's failing trying to download the source code for aumix.  You can get the file here:

Download it from there into buildroot/sources/dl

then make again, and it should work


On Jul 15, 2005, at 2:01 PM, Sir Graham (Terra) wrote:

Hi Craig,
I made your instructions, but now the error is other......
mkdir -p /root/gumstix-buildroot/build_arm/root/boot
cp -fpR --no-dereference /root/gumstix-buildroot/build_arm/linux-2.6.11gum/arch/arm/boot/uImage /root/gumstix-buildroot/build_arm/root/boot/uImage
touch -c /root/gumstix-buildroot/build_arm/root/boot/uImage
wget --passive-ftp -P /root/gumstix-buildroot/sources/dl
           => `/root/gumstix-buildroot/sources/dl/aumix-2.8.tar.bz2'
Resolviendo hecho.
Conectando con[]:80... conectado.
Petición HTTP enviada, esperando respuesta... 403 Forbidden
22:33:52 ERROR 403: Forbidden.
make: *** [/root/gumstix-buildroot/sources/dl/aumix-2.8.tar.bz2] Error 1
[root@Linux gumstix-buildroot]#
uhmmmm.....  If we will try with last Debian release in state of Red Hat 9....  we haven´t this kind of problems?
Sir Graham.
----- Original Message -----
Sent: Friday, July 15, 2005 8:58 PM
Subject: Re: [Gumstix-users] Fw: Problem to compilate root_fs_arm

On Jul 15, 2005, at 4:54 AM, Sir Graham (Terra) wrote:

Hi Craig,

Sorry Don´t work. Show the same problem.
I am download Debian Linux version. I hope this ditribution don´t have problems.....

root@Linux root]# cd gumstix-buildroot
[root@Linux gumstix-buildroot]# make
make -j3 -C /root/gumstix-buildroot/build_arm/linux-2.6.11gum DEPMOD="/sbin/depmod" CROSS_COMPILE=/root/gumstix-buildroot/build_arm/staging_dir/bin/arm-linux-uclibc- ARCH=arm INSTALL_MOD_PATH=/root/gumstix-buildroot/build_arm/root modules_install

This is still trying to call /sbin/depmod instead of the busybox

I just re-read the makefile, and it won't work right if you don't remove the linux directory and then re-make.  During one of the early build stages it either applies a patch needed to use the busybox depmod or it doesn't.  If the directory is already there, then even if you change the DEPMOD definition in the Makefile, it won't apply the patch.

so, rm -rf build_arm/linux-* and then make again