Hi,

I am trying to reflash the firmware (http://docwiki.gumstix.org/Replacing_the_filesystem_image) using the latest build but I seem to get the a JFFS2 load error.

I have copied the serial messages below with command entered.

Thanks
Paul

*** Welcome to Gumstix ***                          

U-Boot code: A3F00000 -> A3F25D1C  BSS: -> A3F5AE38                                                   
RAM Configuration:                  
Bank #0: a0000000 64 MB                       
Flash: 16 MB            
SMC91C1111-0            
Can't overwrite               
Net:   SMC91C1111-0                   
Hit any key to stop autoboot:  0                                
GUM>    
GUM>    
GUM> setenv 192.168.1.1                       
GUM> setenv ipaddr 192.168.1.20                               
GUM> saveenv            
Saving Environment to Flash...                              
.
Un-Protected 1 sectors                      
Erasing Flash...                
. done      
Erased 1 sectors                
Writing to Flash... done                        
.
Protected 1 sectors                   
GUM> tftp a2000000 rootfs.arm_nofpu.jffs2                                         
SMC91111: PHY auto-negotiate timed out                                      

Warning: MAC addresses don't match:                                   
        HW MAC address:  01:21:01:21:01:24                                          
        "ethaddr" value: 00:0A:95:A5:47:3A                                          
Using MAC Address 00:0A:95:A5:47:3A                                   
Using SMC91C1111-0 device                         
TFTP from server 192.168.1.1; our IP address is 192.168.1.20                                                            
Filename 'rootfs.arm_nofpu.jffs2 '.                                  
Load address: 0xa2000000                        
Loading: T T undefined instruction                                  
pc : [<00000040>]    lr : [<a3f04494>]                                      
sp : a3edec54  ip : a3f282dc  fp : a3f282e8                                           
r10: a3f25e00  r9 : a3f282e4  r8 : a3edefdc                                           
r7 : a3edefb8  r6 : 00000003  r5 : 00000000  r4 : a3f282f8                                                          
r3 : e8a3ee01  r2 : ffffffff  r1 : 1aa0b846  r0 : e8a3ee01                                                          
Flags: NzCv  IRQs off  FIQs off  Mode UND_32                                            
Resetting CPU ...                 

resetting ...             


U-Boot 1.1.4 (Aug  1 2006 - 10:47:14)                                     

*** Welcome to Gumstix ***                          

U-Boot code: A3F00000 -> A3F25D1C  BSS: -> A3F5AE38                                                   
RAM Configuration:                  
Bank #0: a0000000 64 MB                       
Flash: 16 MB            
SMC91C1111-0            
Can't overwrite "serial#"                         
Net:   SMC91C1111-0                   
Hit any key to stop autoboot:  2                                

U-Boot 1.1.4 (Aug  1 2006 - 10:47:14)                                     

*** Welcome to Gumstix ***                          

U-Boot code: A3F00000 -> A3F25D1C  BSS: -> A3F5AE38                                                   
RAM Configuration:                  
Bank #0: a0000000 64 MB                       
Flash: 16 MB            
SMC91C1111-0            
Can't overwrite "serial#"                         
Net:   SMC91C1111-0                   
Hit any key to stop au                     
Instruction Cache is ON                       
### JFFS2 loading 'boot/uImage' to 0xa2000000                                             
Scanning JFFS2 FS: | └                      

U-Boot 1.1.4 (Aug  1 2006 - 10:47:14)                                     

*** Welcome to Gumstix ***                          

U-Boot code: A3F00000 -> A3F25D1C  BSS: -> A3F5AE38                                                   
RAM Configuration:                  
Bank #0: a0000000 64 MB                       
Flash: 16 MB            
SMC91C1111-0            
Can't overwrite "serial#"                         
Net:   SMC91C1111-0                   
Hit any key to stop autoboot:  0                                
GUM>    

U-Boot 1.1.4 (Aug  1 2006 - 10:47:14)                                     

*** Welcome to Gumstix ***                          

U-Boot code: A3F00000 -> A3F25D1C  BSS: -> A3F5AE38                                                   
RAM Configuration:                  
Bank #0: a0000000 6                  
Flash: 16 MB            
SMC91C1111-0            
Can't overwrite "serial#"                         
Net:   SMC91C1111-0                   
Hit any key to stop autoboot:  0                                
GUM> setenv■            

U-Boot 1.1.4 (Aug  1 2006 - 10:47:14)                                     

*** Welcome to Gumstix ***                          

U-Boot code: A3F00000 -> A3F25D1C  BSS: -> A3F5AE38                                                   
RAM Configuration:                  
Bank #0: a0000000 64 MB                       
Flash: 16 MB            
SMC91C1111-0            
Can't overwrite "serial#"                         
Net:   SMC91C1111-0                   
Hit any key to stop autoboot:  0                                
Instruction Cache is ON                       
### JFFS2 loading 'boot/uImage' to 0xa2000000                                             
Scanning JFFS2 FS:  done.                         
find_inode failed for name=boot                               
load: Failed to find inode                          
### JFFS2 LOAD ERROR<0> for boot/uImage!                                        
GUM>    
GUM>    
GUM>    
GUM> setenv serverip 192.168.1.1                                
GUM> setenv ipaddr 192.168.1.20                               
GUM> saveenv            
Saving Environment to Flash...                              
.
Un-Protected 1 sectors                      
Erasing Flash...                
. done      
Erased 1 sectors                
Writing to Flash... done                        
.
Protected 1 sectors                   
GUM> tftp a2000000 rootfs.arm_nofpu.jffs2                                         
Using MAC Address 00:0A:95:A5:47:3A                                   
Using SMC91C1111-0 device                         
TFTP from server 192.168.1.1; our IP address is 192.168.1.20                                                            
Filename 'rootfs.arm_nofpu.jffs2'.                                  
Load address: 0xa2                 
Loading: T #################################################################                                                                            
         #################################################################                                                                          
         #################################################################                                                                          
         #################################################################                                                                          
         #################################################################      
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ##################################################
done
Bytes transferred = 3249424 (319510 hex)
GUM> protect on 1:0-1
Protect Flash Sectors 0-1 in Bank # 1
.. done
GUM> erase all
Erase Flash Bank # 1 - Warning: 2 protected sectors will not be erased!
................................................................................
.............................................. done
GUM> cp.b a2000000 40000 $(filename)
Zero length ???
GUM> boot
Instruction Cache is ON
### JFFS2 loading 'boot/uImage' to 0xa2000000
Scanning JFFS2 FS:  done.
find_inode failed for name=boot
load: Failed to find inode
### JFFS2 LOAD ERROR<0> for boot/uImage!
GUM>