Erik,

Your download of the driver file failed, but the file exists:

zcat: /home/erik/Desktop/gumstix-buildroot/sources/dl/hostap-driver-0.3.9.tar.gz: unexpected end of file
Delete that file and try again.

Cheers,

Mike

Erik D. Rodriguez wrote:
Thanks for all your help. I went through your suggestions and started the make process again. The process went much further this time. And yes, Eri(K)'s must stick to together, all 8% of us.

Anyway, apparently in the home stretch, the make process had an issue resolving openobex. I located a site that hosted this file/version and edited the script for it. Then everything went well for a while. This is using build 674. I was crossing my fingers in hopes that the bad url would have been resolved, but apparently not. Here are my results:

/home/erik/Desktop/gumstix-buildroot/sources/getter_script.sh -nH -P /home/erik/Desktop/gumstix-buildroot/sources/dl http://hostap.epitest.fi/releases/hostap-utils-0.3.7.tar.gz -O /home/erik/Desktop/gumstix-buildroot/sources/dl/hostap-utils-0.3.7.tar.gz
--08:53:21--  http://hostap.epitest.fi/releases/hostap-utils-0.3.7.tar.gz
           => `/home/erik/Desktop/gumstix-buildroot/sources/dl/hostap-utils-0.3.7.tar.gz'
Resolving hostap.epitest.fi... 194.100.116.233
Connecting to hostap.epitest.fi[194.100.116.233]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 59,659 [application/x-gzip]

100%[====================================>] 59,659        50.72K/s

08:53:23 (50.59 KB/s) - `/home/erik/Desktop/gumstix-buildroot/sources/dl/hostap-utils-0.3.7.tar.gz' saved [59,659/59,659]

zcat /home/erik/Desktop/gumstix-buildroot/sources/dl/hostap-driver-0.3.9.tar.gz | tar -C /home/erik/Desktop/gumstix-buildroot/build_arm_nofpu -xf -

zcat: /home/erik/Desktop/gumstix-buildroot/sources/dl/hostap-driver-0.3.9.tar.gz: unexpected end of file
zcat /home/erik/Desktop/gumstix-buildroot/sources/dl/hostap-utils-0.3.7.tar.gz | tar -C /home/erik/Desktop/gumstix-buildroot/build_arm_nofpu -xf -
zcat /home/erik/Desktop/gumstix-buildroot/sources/dl/hostapd-0.3.9.tar.gz | tar -C /home/erik/Desktop/gumstix-buildroot/build_arm_nofpu -xf -
mkdir -p /home/erik/Desktop/gumstix-buildroot/build_arm_nofpu/hostap-combined
cp -rf /home/erik/Desktop/gumstix-buildroot/build_arm_nofpu/hostap-driver-0.3.9/* /home/erik/Desktop/gumstix-buildroot/build_arm_nofpu/hostap-combined
cp: cannot stat `/home/erik/Desktop/gumstix-buildroot/build_arm_nofpu/hostap-driver-0.3.9/*': No such file or directory
make: *** [/home/erik/Desktop/gumstix-buildroot/build_arm_nofpu/hostap-combined/.unpacked] Error 1



-----Original Message-----
From: gumstix-users-admin@lists.sourceforge.net on behalf of Dick Davies
Sent: Thu 12/8/2005 4:43 AM
To: gumstix-users@lists.sourceforge.net
Subject: Re: [Gumstix-users] Buildroot Compile Issue
 
On 08/12/05, Erik D. Rodriguez <erik.rodriguez@certifiedsoftware.com> wrote:

  
 /bin/sh: gcc: command not found
    

try

  sudo apt-get install build-essential


--
Rasputin :: Jack of All Trades - Master of Nuns
http://number9.hellooperator.net/


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&op=ick
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users