I recently purchased a configuration consisting of a verdex PRO XL6P, consoleLCD16, NetPro-vx, and WiFi module.  The unit boots just fine with the NetPro board removed.  As set up by gumstix, the device would not properly boot with the NetPro board attached.  I've replaced the file system with the latest pre-built gumstix-basic-image, and a gumstix-basic-image I built myself, and the unit still gives the following errors with the NetPro connected at boot:

modprobe: WARNING: Error running install command for cfio

modprobe: FATAL: Error inserting mcf25 (/lib/modules/2.6.21/extra/
mcf25.ko): Invalid module format

SIOCGIFINDEX failed!: No such device
udhcpc[628]: SIOCGIFINDEX failed!: No such device
done.
JFFS2 notice: (136) jffs2_get_inode_nodes: All zero node header at 0x10053c.
JFFS2 warning: (136) jffs2_do_read_inode_internal: no data nodes found for ino #409
JFFS2 notice: (136) jffs2_get_inode_nodes: All zero node header at 0x1005d0.
JFFS2 warning: (136) jffs2_do_read_inode_internal: no data nodes found for ino #410
JFFS2 notice: (136) jffs2_get_inode_nodes: All zero node header at 0x100660.
JFFS2 warning: (136) jffs2_do_read_inode_internal: no data nodes found for ino #411
JFFS2 notice: (136) jffs2_get_inode_nodes: All zero node header at 0x1006f8.
JFFS2 warning: (136) jffs2_do_read_inode_internal: no data nodes found for ino #412
INIT: Entering runlevel: 5
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0fef98.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #370
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff020.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #371
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x907618.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #1984
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff0a4.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #372
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff12c.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #373
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff1b4.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #374
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff244.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #375
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x907bec.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #1994
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff2d0.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #376
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff358.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #377
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff3dc.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #378
JFFS2 notice: (637) jffs2_get_inode_nodes: All zero node header at 0x0ff464.
JFFS2 warning: (637) jffs2_do_read_inode_internal: no data nodes found for ino #379
JFFS2 notice: (639) jffs2_get_inode_nodes: All zero node header at 0x3c4768.
JFFS2 warning: (639) jffs2_do_read_inode_internal: no data nodes found for ino #686
INIT: cannot execute "/sbin/getty"
...
INIT: Id "S" respawning too fast: disabled for 5 minutes
INIT: cannot execute "/sbin/getty"
...
INIT: Id "1" respawning too fast: disabled for 5 minutes



Is the NetPro-vx board bad?  I'm unable to find help for any of these errors.