Yes, I have saved my bootargs and also I have getty (/sbin/getty)

GUM> printenv
bootcmd=icache on; setenv stderr nulldev; setenv stdout nulldev; if pinit on && fatload ide 0 a2000000 gumstix-factory.script; then setenv stdout serial; setenv stderr serial; echo Found gumstix-factory.script on CF...; autoscr; else if mmcinit && fatload mmc 0 a2000000 gumstix-factory.script; then setenv stdout serial; setenv stderr serial; echo Found gumstix-factory.script on MMC...; autoscr; else setenv stdout serial; setenv stderr serial; katload 100000 && bootm; fi; fi
bootdelay=2
baudrate=115200
bootfile=boot/uImage
verify=no
ethact=SMC91C1111-0
bootargs=console=ttyS0,115200n8 console=tty0 console=tty1 video=pxafb:mode:480x272-16,active root=1f01 rootfstype=jffs2 reboot=cold,hard
stdin=serial
stdout=serial
stderr=serial
serial#=FFFF000000001F00
ethaddr=02:00:00:00:1F:10

Environment size: 787/4092 bytes

Regards,
Prabhu


On Fri, Mar 20, 2009 at 9:56 AM, William Hue <william@neodynsystems.com> wrote:
Hi Prabhu,

Did you save the bootargs before rebooting?  Can you check to see if getty is being run for the LCD/keyboard?

       William


Prabhu nath wrote:
> Hi
>
>      I have connected Samsung LTE430WQ-F0C to my verdex board. Also I
> have enabled the driver for this in my linux configuration
> Device Drivers --> Graphics Support --> LCD Panel ( Samsung LTE430WQ-F0C ).
>
> Copied the uImage to RAM, set the bootargs as follows.
>
> setenv bootargs console=tty0 console=tty1
> video=pxafb:mode:480x272-8,active root=1f01 rootfstype=jffs2
> reboot=cold,hard
>
> I am seeing the logs on the LCD till the following log message
> Starting httpd .....
>
> and hangs here
>
> But I can see the gumstix login prompt on my serial console.
>
> Scenario 2:
>         Even after I change the bootargs to remove ttyS0, still I can
> see the gumstix login prompt on my serial console only, but not on the LCD.
>
>
> Please help.
>
> Regards,
> Prabhu
>
>
>
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------------
> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
> software that enables intelligent coding and step-through debugging.
> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> gumstix-users mailing list
> gumstix-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/gumstix-users

------------------------------------------------------------------------------
Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
easily build your RIAs with Flex Builder, the Eclipse(TM)based development
software that enables intelligent coding and step-through debugging.
Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users