Quick question - do I need to remove the resistor on STTXD if I'm not using TXD?

My hypothesis is that I could make this really simple for myself by just throwing a 10K resistor on RXD from the ID20 chip, since I'm not transmitting to the ID20 (it's like a magnetic card reader, and has no input...just output).



On Tue, Aug 5, 2008 at 2:56 PM, Dave Hylands <dhylands@gmail.com> wrote:
Hi Michael,

> I only need to connect one of the pins - either the CMOS with the onboard
> STTXD resistor removed, or I can use TTL Data (inverted) with an
> inverter/TTL Data (inverted) in RxD on the MiniDin.

Yep.

Also make sure that ground is connected between the ID-20 and the
consoleLCD board.

--
Dave Hylands
Vancouver, BC, Canada
http://www.DaveHylands.com/

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users