Hello,

About non counting RTC :

At first, "./i2c --count=8 0x68 readbyte 0" gave me the same constant value
after setting it with "./i2c --count=8 0x68 wb 0x0 0x3006000203030600", the RTC began to count !

I'm currently looking for a way to tell linux to use it ...

Jerome


On Mon, Apr 30, 2007 at 6:47 PM, Danny Hughes <danny@comp.lancs.ac.uk> wrote:
I've followed the instructions in the Wiki to add support for the DS1307 to
a 2.6.15 buildroot (r1307). It appears to work OK, except that no entry is
created in /dev (e.g. /dev/rtc or whatever) and thus S10clock fails. I have
tried to create an appropriate entry using mknod, but to no avail (I'm not
sure what the correct options are)?

Also, when I query the DS1307 using the I2C test utility linked on the I2C
quickstart page, I always get the same value: 0x80000001010003, shouldn't
the 'seconds' portion of this be changing?

The RTC module is connected to the I2C pins of the Robostix: SCL-RX, SDA-TX,
GND-GND and 5V - V, +5V power is being supplied to the RoboStix.

Any ideas or suggestions would be greatly appreciated.

Thanks in advance,

Danny Hughes,
Computing Department, Lancaster University, UK.
E-Mail: danny@comp.lancs.ac.uk



-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users