Is there a preferred kernel configuration for a WaterStorm with a Davinci DM3703? I can boot it up with the OMAP3503 configuration, but I'm unable to talk to my eCam ov3640 with an i2c transfer error. The camera and cable work just fine on my Water OMAP3503, so I know that part works. That leaves me with the kernel or driver, so I'd like to start with having a 2.6 kernel that's properly configured for the Davinci. Matt
[   14.049224] ov3640_i2c_client_xfer:i2c transfer error:-121
[   14.049224] <7>-------------------------------------------------------------------------------
[   14.049255] <7>ERROR!
[   14.049255] <7>From            : V4l2 driver module
[   14.049285] <7>File            : drivers/media/video/omap3_v4l2_driver/sens_ov3640.c
[   14.049285] <7>Function        : ov3640_i2c_client_xfer
[   14.049316] <7>Line number     : 8840
[   14.049316] <7>Error name      : 1. PORT_OPEN_ERROR 2. FAIL 3.EPERM
[   14.049346] <7>Error number Dec: -1 Hex: 0xFFFFFFFF 
[   14.049346] <7>Reason          : 1. unknown cause of failure											
[   14.049377] 		 2. Failed to open the port may be driver is not properly inserted or file not found				
[   14.049377] 		 3. Operation not permitted
[   14.049407] <7>------------------------------------------------------------------------------
[   14.049407] ov3640_read_reg:read reg error: reg=300a, val=0
[   14.049438] <7>-------------------------------------------------------------------------------



View this message in context: Kernel configuration for WaterStorm (Davinci DM3703)
Sent from the Gumstix mailing list archive at Nabble.com.