Hi Curtis

 

That’s what I thought I was doing with Steve’s image.

It is several months old.

 

I have a working system, without the LAN adapter.

I’ll check and see how much memory it reports when booting …

 

Bill

 

"People sleep peaceably in their beds at night only because rough men

stand ready to do violence on their behalf." - George Orwell

 

From: Curtis Olson [mailto:curtolson@gmail.com]
Sent: Saturday, June 18, 2011 8:50 AM
To: General mailing list for gumstix users.
Subject: Re: [Gumstix-users] Still Have ifconfig problem :(

 

At some point would it make sense to go back to a default set of mlo, u-boot.bin, uImage, and rootfs images to give you some reassurance that your hardware is actually ok, and then from there you could continue to chase a setup/configuration solution.

On Sat, Jun 18, 2011 at 7:42 AM, William Pretty Security Inc <bill.pretty@xplornet.com> wrote:

I'll try that. But I built the uSD card using Steve Sakoman's script ...
Wouldn't it use the right MLO/U-boot files ??

There is another post that reports 512M as well. Hmmmmm :(

Bill

"People sleep peaceably in their beds at night only because rough men
stand ready to do violence on their behalf." - George Orwell


-----Original Message-----
From: ScottEllis [mailto:scottellis.developer@gmail.com]
Sent: Saturday, June 18, 2011 6:55 AM
To: gumstix-users@lists.sourceforge.net
Subject: Re: [Gumstix-users] Still Have ifconfig problem :(


Earlier in this thread you posted this

===================
Loading u-boot.bin from mmc

U-Boot 2010.12 (Mar 06 2011 - 20:54:20)

OMAP3503-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
Gumstix Overo board + LPDDR/NAND
I2C:   ready
DRAM:  512 MiB
NAND:  512 MiB
MMC:   OMAP SD/MMC: 0

*** Warning - bad CRC, using default environment
...
=====================

None of the Overo's have 512 MB of NAND.

I think you are running the wrong version of U-Boot and maybe MLO also.

Here is what output looks like on one of my systems, including the MLO
portion

=====================
Texas Instruments X-Loader 1.4.4ss (Jun 13 2011 - 19:01:37)
OMAP3503-GP ES2.1
Board revision: 0
Reading boot sector
Loading u-boot.bin from mmc


U-Boot 2010.09 (Jun 10 2011 - 16:35:07)

OMAP3503-GP ES2.1, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz
Gumstix Overo board + LPDDR/NAND
I2C:   ready
DRAM:  256 MiB
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
Board revision: 0
Direct connection on mmc2
No EEPROM on expansion board
Die ID #413000020000000004013ef00a02100a
Net:   smc911x-0
Hit any key to stop autoboot:  0
mmc1 is available
reading boot.scr

** Unable to read "boot.scr" from mmc 0:1 **
reading uImage
...
=====================

I think you might have built u-boot instead of u-boot-omap3.

scott@quad:~/overo-oe/org.openembedded.dev/recipes/u-boot$ grep 2010.9 *
u-boot-omap3_git.bb:PV = "2010.9+${PR}+git${SRCREV}"

scott@quad:~/overo-oe/org.openembedded.dev/recipes/u-boot$ grep 2010.12 *
u-boot_git.bb:PV_overo = "2010.12+${PR}+gitr${SRCREV}"
u-boot-sakoman_git.bb:PV = "2010.12+${PR}+git${SRCREV}"



>From a previous thread, the commands you wanted are

bitbake -c clean x-load && bitbake x-load

then

bitbake -c clean u-boot-omap3 && bitbake u-boot-omap3


You might want to precede those with

bitbake -c clean u-boot to get rid of that first.


--
View this message in context:
http://old.nabble.com/Still-Have-ifconfig-problem-%3A%28-tp31861366p31874647
.html

Sent from the Gumstix mailing list archive at Nabble.com.


----------------------------------------------------------------------------
--
EditLive Enterprise is the world's most technically advanced content
authoring tool. Experience the power of Track Changes, Inline Image
Editing and ensure content is compliant with Accessibility Checking.
http://p.sf.net/sfu/ephox-dev2dev
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1382 / Virus Database: 1513/3710 - Release Date: 06/17/11


------------------------------------------------------------------------------
EditLive Enterprise is the world's most technically advanced content
authoring tool. Experience the power of Track Changes, Inline Image
Editing and ensure content is compliant with Accessibility Checking.
http://p.sf.net/sfu/ephox-dev2dev
_______________________________________________
gumstix-users mailing list
gumstix-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gumstix-users




--

Curtis Olson:

http://www.atiak.com - http://aem.umn.edu/~uav/

http://www.flightgear.org - http://gallinazo.flightgear.org