Hi Craig,

We probe in this port and donīt work.  Any idea....

First configurate the  port:

# stty -F /dev/ttyS2 speed 115200

make this comand

# yes > /dev/ttyS2
Change the cable to the second port and dont work......
 
With the /dev/ttyS0 works well....
 
Is necessary any configuration more? Itīs a extrange problem....
 
Regards.,
 
Sir Graham.
 



----- Original Message -----
From: Craig Hughes
To: gumstix-users@lists.sourceforge.net
Sent: Thursday, July 14, 2005 11:22 PM
Subject: Re: [Gumstix-users] problems second serial port of gumstix....


Depends on the waysmall board you have -- most likely it's a STUART waysmall, and then the 2nd port is ttyS2.


C


On Jul 14, 2005, at 1:33 PM, Sir Graham (Terra) wrote:


Hi,

We have the gumstix without bluetooth module and without MMC/SD card (This is the gumstix with etherstix).

Well, we make a trys with the "second" serial port of Gumstix.  What port is this ttyS1, ttyS2, ttyS3?

We try in all ports to make this operation:

# stty -F /dev/ttyS1 speed 115200
# stty -F /dev/ttyS2 speed 115200
# stty -F /dev/ttyS3 speed 115200

# yes >  /dev/ttyS1    Change the cable to the other conector and nothing....
# yes >  /dev/ttyS2    Change the cable to the other conector and nothing....
# yes >  /dev/ttyS3    Change the cable to the other conector and nothing....

Any idea of the problem?

Regards,
Sir Graham.