Unfortunately I’m learning Linux and the gumstix at the same time…   (u-boot version 1.1.4, Linux version 2.6.21gum)

 

I have an XL6P with a netCF board. I’ve run buildroot and successfully loaded a new rootfs. (with lots of screw-ups and retries) However now I have the following problems:

 

  1. The Ethernet interface is not working and there are plenty of error messages below. I’m just not sure how to fix it or what I screwed up. (see red highlights below. Also, one of the Ethernet LEDS is on and the other is blinking.)
    1. Is there anything beyond the defconfig that is needed to make Eth0 work?? If not I should probably just start clean, re-download from SVN and rebuild. (I actually did enable the DHCP client, but it didn’t help)
  2. The Compact Flash doesn’t mount like it used to with the ‘mount /mnt/cf’ command. (error message below)
                         ‘
    mount: Mounting /dev/hda1 on /mnt/cf failed: No such file or directory’
    1. Again, is there anything beyond defconfig that is needed to make Compact flash work??

  3. Does the generic factory image pointed to on the wiki support verdex. It seems to be from November.  …little confused as to how one factory image could support all the various motherboards??

 

…sorry for the long email.

 

BrianS

---------------------------------------------------------------------------------------------------------------------------------------------------------

U-Boot 1.1.4 (Mar  1 2007 - 17:10:55) - PXA270@600 MHz - 1321                                                            

*** Welcome to Gumstix ***                         

U-Boot code: A3F00000 -> A3F25850  BSS: -> A3F5AE70                                                  
RAM Configuration:                 
Bank #0: a0000000 128 MB                       
Flash: 32 MB           
SMC91C1111-0          
Can't overwrite "serial#"                        
Can't overwrite "ethaddr"                        
Net:   SMC91C1111-0                  
Hit any key to stop autoboot:  0                               
Instruction Cache is ON                      
### JFFS2 loading 'boot/uImage' to 0xa2000000                                            
Scanning JFFS2 FS: ......... done.                                 
### JFFS2 load complete: 858704 bytes loaded to 0xa2000000                                                         
## Booting image at a2000000 ...                               
   Image Name:   uImage                      
   Image Type:   ARM Linux Kernel Image (uncompressed)                                                     
   Data Size:    858640 Bytes = 838.5 kB                                       
   Load Address: a0008000                        
   Entry Point:  a0008000                        
OK 

Starting kernel ...                  

Linux version 2.6.21gum (root@linux-sibilsky) (gcc version 4.1.1) #1 Fri Jun 1 1                                                                               

4:29:13 CDT 2007               
CPU: XScale-PXA270 [69054117] revision 7 (ARMv5TE), cr=0000397f                                                              

Machine: The Gumstix Platform                            
Memory policy: ECC disabled, Data cache writeback                                                
Run Mode clock: 208.00MHz (*16)                              
Turbo Mode clock: 624.00MHz (*3.0, active)                                         
Memory clock: 104.00MHz (/2)                           
System bus clock: 104.00MHz                          
CPU0: D VIVT undefined 5 cache                             
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets                                                                   

CPU0: D cache: 32768 bytes, associativity 32                                         
Built 1 zonelists.  Total pages: 32512                                     
Kernel command line: console=ttyS0,115200n8 root=1f01 rootfstype=jffs2 reboot=co                                                                               

ld,hard      
PID hash table entries: 512 (order: 9, 2048 bytes)                                                 
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)                                                             

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)                                                           

Memory: 128MB = 128MB total                          
Memory: 128000KB available (1596K code, 165K data, 68K init)                                                           

Mount-cache hash table entries: 512                                  
CPU: Testing write buffer coherency: ok                                      
NET: Registered protocol family 16                                 
NET: Registered protocol family 2Could not load /lib/modules/2.6.2
Time: pxa_timer clocksource has been installed.odules/2.6.21gum/modules.ds and comment out or
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)                                                             

TCP established hash table entries: 4096 (order: 3, 32768 bytes)YSKbWR+wR+7RLxoUjao5x4/JeB+                                    

TCP bind hash table entries: 4096 (order: 2, 16384 bytes)uld not load /lib/modules/2.6.21gum/modules.drobe: FATAL:
TCP: Hash tables configured (established 4096 bind 4096)/ZtiMeA                                                
TCP reno registered                  
JFFS2 version 2.2. (NAND) (SUMMARY)  (C) 2001-2006 Red Hat, Inc.  
suc  
ep: No such file or directoryauto mwlan0            
io scheduler noop registeredDec 31 16:08:57            
io scheduler cfq registered (default)ould not load /lib/modules/2.6.21gum/
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000                                       
Dec 31 16
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUARTot load /lib/modules/2.6.21gum/modules.drobe: FATAL: Could not

Probing Gumstix Flash ROM at physical address 0x00000000 (16-bit bankwidth)                                                                          

Gumstix Flash ROM: Found 1 x16 devices at 0x0 in 16-bit bank 
ep: No such file or directorygQ1YH1ICLw=                
 Intel/Sharp Extended Query Table at 0x010A          

Dec 31 16:10:43 modprobe: FATA
 Intel/Sharp Extended Query Table at 0x010A                                          
 Intel/Sharp Extended Query Table at 0x010Adirectoryyn mount                         
 Intel/Sharp Extended Query Table at 0x010Aile or directoryAL: Could not load /lib/mod
 Intel/Sharp Extended Query Table at 0x010A               

Dec 31 16:10:43 modprobe:
Using buffer write method                        
0x01f00000-0x02000000 : "Kernel"h file or directoryy:10 modprobe
TCP cubic registered                   
XScale iWMMXt coprocessor detected.p: No such file or directoryAL: Cou
VFS: Mounted root (jffs2 filesystem).                                    
Freeing init memory: 68Kdprobe: FATAL: Could not
NET: Registered protocol family 1es.d 838.5 kBte "serial#        
Initializing random number generator... done.                                            
Starting network... directory   Load A
udhcpc (v0.9.9-pre) started                          
eth0: SMC91C11xFD (rev 2) at c8870300 IRQ 68 DMA 8 [nowait]                          
ep: No such file or directoryJu
eth0: Ethernet addr: 26:9f:27:80:cd:50
                         
Instructi 
Nothing to flush.ch file or direct
Nothing to flush.oad /lib/modul  
eth0: link down              
NET: Registered protocol family 17:10:43 modprobe: FATAL: Could not
Starting Rendezvous:.21gum/modules.d, cr
NET: Registered protocol family 10                                 
ADDRCONF(NETDEV_UP): eth0: link is not ready
 
Starting httpd...