#10 some mislabeled pin descriptions in Overo J4

[jeff steele]

In file :
http://www.gumstix.net/Hardware/view/Motherboard-I/O/Connector-J2-for-Overo/112.html

Some of the pins are mis-labeled.

Pin 9 "GPIO65_ETH1_TRQ1" should be "GPIO65_ETH1_IRQ1"
Pin 65 "EM_NBF0" should be "EM_NBE0"
Pin 69 "EM_NBF1" should be "EM_NBE1"
Pin 30 "GPIO21_MMC3_DAT4" should be "GPIO21_MMC3_DAT7"
Pin 31 "GPIO17_MMC3_D" should be "GPIO17_MMC3_D3"

[Don A.]

This page is no longer valid. The 70-pin connectors on each Overo COM are J1 and J4. Pinouts for these connectors are defined here:
http://www.gumstix.net/Hardware/cat/I/O-connectors-cabling/112.html

[Don A.]

The signals defined for J4 are correctly labeled:

http://www.gumstix.net/Hardware/view/I/O-connectors-cabling/Gumstix-Overo-70-pin-connector-J4-features-Extended-Memory-Bus-and-MMC-signals/112.html