[Seagull-users] configure Seagull as a Diameter Client and send CCR messages

[Rohit K. S. K. <r.s...@ve...>]

Hi,
I want to configure Seagull as a Diameter Client and send CCR messages to a Diameter Server. I tried the following configuration but it is not working. Please help.

File-ccr-cca.client.xml

<init>
  <send channel="channel-1">
    <command name="CER">
     <command name="CER">
      <avp name="Origin-Host" value="mundiotest_mme3"> </avp>
      <avp name="Origin-Realm" value="epc.mundio.mme.org"> </avp>
    <!--  <avp name="Host-IP-Address" value="0x0A1E036B"> </avp> <!-- IPV4 10.30.3.107-->
      <avp name="Vendor-Id" value="0"> </avp>
      <avp name="Product-Name" value="xgate"> </avp>
      <avp name="Inband-Security-Id" value="0"> </avp>
      <avp name="Auth-Application-Id" value="16777291"> </avp>
      <avp name="Firmware-Revision" value="1"> </avp>
    </command>
  </send>
</init>
</action>
    <command name="CCR">
      <avp name="Session-Id" value="value_is_replaced"> </avp>
      <avp name="Origin-Host" value="mundiotest_mme3"> </avp>
      <avp name="Origin-Realm" value="epc.mundio.mme.org"> </avp>
      <avp name="Host-IP-Address" value="0x0A1E036B"> </avp> <!-- IPV4 10.30.3.107-->
      <avp name="Destination-Realm" value="India-096-Test"> </avp>
      <avp name="Destination-Host" value="India-096"> </avp>
      <avp name="Vendor-Specific-Application-Id">
              <avp name="Vendor-Id" value="10415"></avp>
              <avp name="Auth-Application-Id" value="16777291"></avp>
      </avp>

File-ccr-cca.ro.client.xml

      <command name="CCR">
      <avp name="Session-Id" value="mundiotest_mme3"> </avp>
      <avp name="Origin-Host" value="seagull.mydomain.com"> </avp>
      <avp name="Origin-Realm" value="epc.mundio.mme.org"> </avp>
      <avp name="Host-IP-Address" value="0x0A1E036B"> </avp>
      <avp name="Destination-Realm" value="ExampleRealm"> </avp>
      <avp name="Vendor-Specific-Application-Id"> </avp>
        <avp name="Vendor-Id" value="10415"></avp>
        <avp name="Auth-Application-Id" value="4"></avp>
      </avp>
      <avp name="Auth-Application-Id" value="4"></avp>
      <avp name="Service-Context-Id" value="32...@3g..."> </avp>
      <avp name="CC-Request-Type" value="0x00000001"> </avp>
      <avp name="CC-Request-Number" value="0"> </avp>
    </command>
    <action>
      <start-timer></start-timer>
    </action>
  </send>

Please let me know if you need any additional information
Regards
Rohit kumar