From: Srivastava, A. K. <anu...@hp...> - 2009-05-04 04:47:54
|
Hello, A seagull client gets a closed channel indication while starting, in case the particular port is already in use by another process. you can check whether you have any such problems. As regarding the error "No protocol found for this name [al]" you can ignore it as its a bug in seagull, corrected in the trunk. Also see if you get anything in with the A level logs. Anuj ________________________________ From: Sachidananda Sahoo [mailto:sah...@ya...] Sent: Saturday, May 02, 2009 11:08 AM To: gul...@li... Subject: [Seagull-users] Diameter Server and clinet issue in test senariou Hi , When i had run the client below logs CLIENT LOGS -------- 2009-04-30.21:08:11.201|A|START log 2009-04-30.21:08:11.202|A|Platform use LITTLE_ENDIAN coding 2009-04-30.21:08:11.202|A|Integer32 Type size is: 4 2009-04-30.21:08:11.202|A|Integer64 Type size is: 8 2009-04-30.21:08:11.202|A|Configuration data: | |option_log_file [../logs/sar-saa.client.log] | |option_conf_file [../config/conf.client.xml] | |option_dico_file [../config/base_cx.xml] | |option_scen_file [../scenario/sar-saa.client.xml] | |log_stat_file [../logs/client-stat.csv] | |option_log_level [ET] | |option_bg_mode [false] | |call_rate [1] | |burst_limit [0] | |max_send [200] | |max_receive [200] | |select_timeout [50] | |max_simult_calls [2000] | |call_timeout_ms [10000] | |msg_buffer_size [4096] | |display_period [1] | |log_stat_period [1] | |resp_time_repart [50,75,100,150,300,5000] | |number_calls [0] | |notimelog [false] | |msg check [false] | |msg check mask [P] | |check behaviour [warning] | |call rate scale [1] | |model traffic [best-effort] | |external data file [none] | |external data select [sequential] 2009-04-30.21:08:11.206|E|No protocol found for this name [al] 2009-04-30.21:08:11.206|A|PID [28996] 2009-04-30.21:08:27.223|T|channel [channel-1] closed 2009-04-30.21:08:27.444|A|STOP log SERVER LOG --------------------- 2009-04-30.21:08:04.162|A|START log 2009-04-30.21:08:04.162|A|Platform use LITTLE_ENDIAN coding 2009-04-30.21:08:04.162|A|Integer32 Type size is: 4 2009-04-30.21:08:04.162|A|Integer64 Type size is: 8 2009-04-30.21:08:04.162|A|Configuration data: | |option_log_file [../logs/sar-saa.server.log] | |option_conf_file [../config/conf.server.xml] | |option_dico_file [../config/base_cx.xml] | |option_scen_file [../scenario/sar-saa.server.xml] | |log_stat_file [../logs/server-stat.csv] | |option_log_level [ET] | |option_bg_mode [false] | |call_rate [0] | |burst_limit [0] | |max_send [2000] | |max_receive [2000] | |select_timeout [50] | |max_simult_calls [2000] | |call_timeout_ms [10000] | |msg_buffer_size [4096] | |display_period [1] | |log_stat_period [1] | |resp_time_repart [50,75,100,150,300,5000] | |number_calls [0] | |notimelog [false] | |msg check [false] | |msg check mask [P] | |check behaviour [warning] | |call rate scale [1] | |model traffic [best-effort] | |external data file [none] | |external data select [sequential] 2009-04-30.21:08:04.167|E|No protocol found for this name [al] 2009-04-30.21:08:04.167|A|PID [28983] 2009-04-30.21:08:27.484|A|STOP log Please tell me how to fix the same issue in both client and server . Advance Thanks Sachidananda Sahoo |