Menu
▾
▴
gull-users
|
From: gates g. <gat...@gm...> - 2018-04-04 23:36:13
|
Hello, I am setting up seagull to use for Rx interface and I am running into an issue with an AVP that has quotes in the value itself. Is there an escape character I can use in seagull scenario xml file that will actually send the avp value with the quote in it? Ex: <avp name="Identifier" value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> </avp> (Note the quotes after 'ref=' and after 'icse', they are part of the avp value itself). Any one able to get this working? Thank you in-advance. Regards. |
|
From: David K. <g.d...@gm...> - 2018-04-05 06:28:00
|
Hi, have you tried " ? Not tested... BR David Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...> napsal: > Hello, > > I am setting up seagull to use for Rx interface and I am running into an > issue with an AVP that has quotes in the value itself. Is there an escape > character I can use in seagull scenario xml file that will actually send > the avp value with the quote in it? > > Ex: <avp name="Identifier" > value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> </avp> (Note the quotes > after 'ref=' and after 'icse', they are part of the avp value itself). > > Any one able to get this working? > > Thank you in-advance. > > Regards. > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Gull-users mailing list > Gul...@li... > https://lists.sourceforge.net/lists/listinfo/gull-users > |
|
From: gates g. <gat...@gm...> - 2018-04-05 14:23:27
|
Yes, seagull reports an error when trying to run the scenario. On Wed, Apr 4, 2018 at 11:27 PM David Krupička <g.d...@gm...> wrote: > Hi, have you tried " ? Not tested... > BR > David > > Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...> > napsal: > >> Hello, >> >> I am setting up seagull to use for Rx interface and I am running into an >> issue with an AVP that has quotes in the value itself. Is there an escape >> character I can use in seagull scenario xml file that will actually send >> the avp value with the quote in it? >> >> Ex: <avp name="Identifier" >> value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> </avp> (Note the quotes >> after 'ref=' and after 'icse', they are part of the avp value itself). >> >> Any one able to get this working? >> >> Thank you in-advance. >> >> Regards. >> >> > >> ------------------------------------------------------------------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> _______________________________________________ >> Gull-users mailing list >> Gul...@li... >> https://lists.sourceforge.net/lists/listinfo/gull-users >> > |
|
From: Anton R. <ant...@gm...> - 2018-04-05 14:31:42
|
Hi, You have colon encoded as %3A (%+ASCII code). Try the same for quotes - %22 https://www.asciitable.com/ Regards, Anton 2018-04-05 17:23 GMT+03:00 gates gates <gat...@gm...>: > Yes, seagull reports an error when trying to run the scenario. > > > On Wed, Apr 4, 2018 at 11:27 PM David Krupička <g.d...@gm...> > wrote: > >> Hi, have you tried " ? Not tested... >> BR >> David >> >> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...> >> napsal: >> >>> Hello, >>> >>> I am setting up seagull to use for Rx interface and I am running into an >>> issue with an AVP that has quotes in the value itself. Is there an escape >>> character I can use in seagull scenario xml file that will actually send >>> the avp value with the quote in it? >>> >>> Ex: <avp name="Identifier" value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> >>> </avp> (Note the quotes after 'ref=' and after 'icse', they are part of the >>> avp value itself). >>> >>> Any one able to get this working? >>> >>> Thank you in-advance. >>> >>> Regards. >>> >>> >> ------------------------------------------------------------ >>> ------------------ >>> Check out the vibrant tech community on one of the world's most >>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot______ >>> _________________________________________ >>> Gull-users mailing list >>> Gul...@li... >>> https://lists.sourceforge.net/lists/listinfo/gull-users >>> >> > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Gull-users mailing list > Gul...@li... > https://lists.sourceforge.net/lists/listinfo/gull-users > > |
|
From: gates g. <gat...@gm...> - 2018-04-05 16:28:02
|
Hi Anton, Thanks for the reply, but seagull is just taking it as text and in the diameter avp I can see the same """ and "%3B" being sent out as text in avp value without converting to symbol. Any other options I could try? Thanks. On Thu, Apr 5, 2018 at 7:31 AM, Anton Rozhkov <ant...@gm...> wrote: > Hi, > > You have colon encoded as %3A (%+ASCII code). Try the same for quotes - %22 > https://www.asciitable.com/ > > Regards, > Anton > > 2018-04-05 17:23 GMT+03:00 gates gates <gat...@gm...>: > >> Yes, seagull reports an error when trying to run the scenario. >> >> >> On Wed, Apr 4, 2018 at 11:27 PM David Krupička < >> g.d...@gm...> wrote: >> >>> Hi, have you tried " ? Not tested... >>> BR >>> David >>> >>> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...> >>> napsal: >>> >>>> Hello, >>>> >>>> I am setting up seagull to use for Rx interface and I am running into >>>> an issue with an AVP that has quotes in the value itself. Is there an >>>> escape character I can use in seagull scenario xml file that will actually >>>> send the avp value with the quote in it? >>>> >>>> Ex: <avp name="Identifier" value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> >>>> </avp> (Note the quotes after 'ref=' and after 'icse', they are part of the >>>> avp value itself). >>>> >>>> Any one able to get this working? >>>> >>>> Thank you in-advance. >>>> >>>> Regards. >>>> >>>> >>> ------------------------------------------------------------ >>>> ------------------ >>>> Check out the vibrant tech community on one of the world's most >>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot______ >>>> _________________________________________ >>>> Gull-users mailing list >>>> Gul...@li... >>>> https://lists.sourceforge.net/lists/listinfo/gull-users >>>> >>> >> ------------------------------------------------------------ >> ------------------ >> Check out the vibrant tech community on one of the world's most >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >> _______________________________________________ >> Gull-users mailing list >> Gul...@li... >> https://lists.sourceforge.net/lists/listinfo/gull-users >> >> > |
|
From: gates g. <gat...@gm...> - 2018-04-06 00:17:10
|
Hi David, Thanks a lot, this worked. The AVP was already defined as OctetString, I was earlier entering the actual value and tried different ways to add quotes and it failed. Now, I took the string converted it to hex and added '0x' as prefix and tried. This way seagull is actually sending out the quotes in the AVP value. <avp name="Identifier" value="0x7265663d2275726e25334175726e2d37253341336770702d736572766963652e696d732e6963736922"> </avp> Thanks again. On Thu, Apr 5, 2018 at 12:35 PM, David Krupička <g.d...@gm...> wrote: > Hi, > > my seagull knowledge is limited and I did not test it. Try to define the > AVP as OctetString, convert the string to hex and prepend the result with > 0x.. 0=zero > Or simply prohibit quotes in the ID's... > > BR > David > > > Dne čt 5. 4. 2018 6:27 odp. uživatel gates gates <gat...@gm...> > napsal: > >> Hi Anton, >> Thanks for the reply, but seagull is just taking it as text and in the >> diameter avp I can see the same """ and "%3B" being sent out as text >> in avp value without converting to symbol. >> >> Any other options I could try? >> >> Thanks. >> >> On Thu, Apr 5, 2018 at 7:31 AM, Anton Rozhkov <ant...@gm...> >> wrote: >> >>> Hi, >>> >>> You have colon encoded as %3A (%+ASCII code). Try the same for quotes - >>> %22 >>> https://www.asciitable.com/ >>> >>> Regards, >>> Anton >>> >>> 2018-04-05 17:23 GMT+03:00 gates gates <gat...@gm...>: >>> >>>> Yes, seagull reports an error when trying to run the scenario. >>>> >>>> >>>> On Wed, Apr 4, 2018 at 11:27 PM David Krupička < >>>> g.d...@gm...> wrote: >>>> >>>>> Hi, have you tried " ? Not tested... >>>>> BR >>>>> David >>>>> >>>>> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...> >>>>> napsal: >>>>> >>>>>> Hello, >>>>>> >>>>>> I am setting up seagull to use for Rx interface and I am running into >>>>>> an issue with an AVP that has quotes in the value itself. Is there an >>>>>> escape character I can use in seagull scenario xml file that will actually >>>>>> send the avp value with the quote in it? >>>>>> >>>>>> Ex: <avp name="Identifier" value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> >>>>>> </avp> (Note the quotes after 'ref=' and after 'icse', they are part of the >>>>>> avp value itself). >>>>>> >>>>>> Any one able to get this working? >>>>>> >>>>>> Thank you in-advance. >>>>>> >>>>>> Regards. >>>>>> >>>>>> >>>>> ------------------------------------------------------------ >>>>>> ------------------ >>>>>> Check out the vibrant tech community on one of the world's most >>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot______ >>>>>> _________________________________________ >>>>>> Gull-users mailing list >>>>>> Gul...@li... >>>>>> https://lists.sourceforge.net/lists/listinfo/gull-users >>>>>> >>>>> >>>> ------------------------------------------------------------ >>>> ------------------ >>>> Check out the vibrant tech community on one of the world's most >>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >>>> _______________________________________________ >>>> Gull-users mailing list >>>> Gul...@li... >>>> https://lists.sourceforge.net/lists/listinfo/gull-users >>>> >>>> >>> >> |
|
From: David K. <g.d...@gm...> - 2018-04-06 05:06:43
|
Glad it worked! Dne pá 6. 4. 2018 2:16 dop. uživatel gates gates <gat...@gm...> napsal: > Hi David, > Thanks a lot, this worked. > > The AVP was already defined as OctetString, I was earlier entering the > actual value and tried different ways to add quotes and it failed. > > Now, I took the string converted it to hex and added '0x' as prefix and > tried. This way seagull is actually sending out the quotes in the AVP value. > <avp name="Identifier" > value="0x7265663d2275726e25334175726e2d37253341336770702d736572766963652e696d732e6963736922"> > </avp> > > Thanks again. > > On Thu, Apr 5, 2018 at 12:35 PM, David Krupička < > g.d...@gm...> wrote: > >> Hi, >> >> my seagull knowledge is limited and I did not test it. Try to define the >> AVP as OctetString, convert the string to hex and prepend the result with >> 0x.. 0=zero >> Or simply prohibit quotes in the ID's... >> >> BR >> David >> >> >> Dne čt 5. 4. 2018 6:27 odp. uživatel gates gates <gat...@gm...> >> napsal: >> >>> Hi Anton, >>> Thanks for the reply, but seagull is just taking it as text and in the >>> diameter avp I can see the same """ and "%3B" being sent out as text >>> in avp value without converting to symbol. >>> >>> Any other options I could try? >>> >>> Thanks. >>> >>> On Thu, Apr 5, 2018 at 7:31 AM, Anton Rozhkov <ant...@gm... >>> > wrote: >>> >>>> Hi, >>>> >>>> You have colon encoded as %3A (%+ASCII code). Try the same for quotes - >>>> %22 >>>> https://www.asciitable.com/ >>>> >>>> Regards, >>>> Anton >>>> >>>> 2018-04-05 17:23 GMT+03:00 gates gates <gat...@gm...>: >>>> >>>>> Yes, seagull reports an error when trying to run the scenario. >>>>> >>>>> >>>>> On Wed, Apr 4, 2018 at 11:27 PM David Krupička < >>>>> g.d...@gm...> wrote: >>>>> >>>>>> Hi, have you tried " ? Not tested... >>>>>> BR >>>>>> David >>>>>> >>>>>> Dne čt 5. 4. 2018 1:36 dop. uživatel gates gates <gat...@gm...> >>>>>> napsal: >>>>>> >>>>>>> Hello, >>>>>>> >>>>>>> I am setting up seagull to use for Rx interface and I am running >>>>>>> into an issue with an AVP that has quotes in the value itself. Is there an >>>>>>> escape character I can use in seagull scenario xml file that will actually >>>>>>> send the avp value with the quote in it? >>>>>>> >>>>>>> Ex: <avp name="Identifier" >>>>>>> value="ref="urn%3Aurn-7%3A3gpp-service.ims.icsi""> </avp> (Note the quotes >>>>>>> after 'ref=' and after 'icse', they are part of the avp value itself). >>>>>>> >>>>>>> Any one able to get this working? >>>>>>> >>>>>>> Thank you in-advance. >>>>>>> >>>>>>> Regards. >>>>>>> >>>>>>> >>>>>> >>>>>>> ------------------------------------------------------------------------------ >>>>>>> Check out the vibrant tech community on one of the world's most >>>>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >>>>>>> _______________________________________________ >>>>>>> Gull-users mailing list >>>>>>> Gul...@li... >>>>>>> https://lists.sourceforge.net/lists/listinfo/gull-users >>>>>>> >>>>>> >>>>> >>>>> ------------------------------------------------------------------------------ >>>>> Check out the vibrant tech community on one of the world's most >>>>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot >>>>> _______________________________________________ >>>>> Gull-users mailing list >>>>> Gul...@li... >>>>> https://lists.sourceforge.net/lists/listinfo/gull-users >>>>> >>>>> >>>> >>> > |
Thanks for helping keep SourceForge clean.
X