How i can start und Stop the realtime spectrum on a tablet?
i cand find a menu or a start/stop button
i have no chance to change the frequency …
i use a surface pro and windows 8.1
The "Stop" works as a stop-start, it means that the original is always at the start of the application, it immediately begins to interrogate RTL_POWER. To run under Windows 64 bit operating system you must install the 64 - bit drivers for tuner and a 64-bit version RTL_POWER.
Once you have selected the input window frequency in MHz, the input focus leaves. This fix cleaned archive updated. Thank you for your message.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
now the input of the frequency works a bit better, but is still strange - somtimes it jumps to strange values at the stop-frequency. i think thats still the problem that you can't stop the scan. it is not possible to make a real start/stop-button?
one wish: it would be awesome if it is possible to change the size of the waterfall :)
many thanks for your work!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Be careful and reconsider all five videos on my YouTube channel http://www.youtube.com/user/LaboratoryW. Everything you say has already been implemented. The "Stop" (Stop-Start) is on the front panel itself (bottom - right cross and a hint), here it is just duplicated in the context menu.
ok, i see… but i think the problem is the tablet.
i testet now the X ("Stop visualisation")many times, but most time doesn't give any reaction :(
change the size of the waterfall now works, but on the tablet its very very difficult that the cusor switch to the sizetool. my feel is that the changeline is only 1 pixel?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
And what kind of reaction you'd expect when you press the Stop button? When pressed poll RTL_POWER utility stops and visualization stops. Pressing the STOP - visualization continues.
Resizing waterfall always worked. No modifications to the software have been conducted. What about the width of the splitter (for vertical shear waterfall) - it is three pixels. Perhaps for the small screens of the tablet that is not enough, and I agree with you. It changed to 12 pixels. Siphon archive.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
thats the problem… if i press the "stop X" …it doesn't stop! it still run and run.
it looks like that the button works only in a very short timearea, when the display on the left side change from "Load Data…" to "Config" for a very short time
If the display is "Load Data", i can push the X many times without any reaction.
for the waterfall: 12 pix is many times better to get the point with a finger or a stick
:)
i think a great feature for the future is to add some "own predefined" frequency-areas that you can fast recall some different setups (Startfreq, stopfreg, step, ppm and gain)
sorry for my bad english.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Looks like it. you do not understand how the START-STOP button. If you
press it many times, then every click you deactivate it work, then
activate. This stop-start button, and as I have mentioned many times.
Press it once - stop. press again - start again. I do not know how you
click on plansheteb but I recorded the video and show that it works.
thats the problem… if i press the "stop X" …it doesn't stop! it still run
and run.
it looks like that the button works only in a very short timearea, when the
display on the left side change from "Load Data…" to "Config" for a very
short time
If the display is "Load Data", i can push the X many times without any
reaction.
for the waterfall: 12 pix is many times better to get the point with a
finger or a stick
:)
i think a great feature for the future is to add some "own predefined"
frequency-areas that you can fast recall some different setups (Startfreq,
stopfreg, step, ppm and gain)
Status: open Milestone: 1.0 Created: Thu Jun 05, 2014 01:14 PM UTC by ar8001 Last Updated: Fri Jun 06, 2014 05:29 AM UTC Owner: nobody
How i can start und Stop the realtime spectrum on a tablet?
i cand find a menu or a start/stop button
i have no chance to change the frequency …
i use a surface pro and windows 8.1
i understand how it works … thats not the problem.
but on the tablet, the X doesn't work!!
i push the X .. the spectrum still run.
i wait a longer time .. spectrum runs
i try to push the X again … nothing, the spectrum still runs and run and run!
i think your tool doesn't recognize the -klick event on the tablet …
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
i try again … doesn't work!
i try the "right click" .. alsow, i don't get a submenu.
after that, i installed a virtual windows 7 machine on my macbook pro … on this machine the rightclick-submenu works. but not on the windows 8.1 tablet.
so, it looks that this is a problem of windows 8.1 or the pen-digitizer of the tablet!
my screen and menu looks a bit different like the screen shown in your videos …
i make some screenshots
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Excuse me, but I am your menu screenshots and see that you are using an older version. Archive you have not updated. On the front panel buttons have the old service will than on video, and there is no menu and click F9 hotkeys old. Be careful.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Are not you embarrassed discrepancy latest video and your screenshots?
Project on sourceforge.net laid temporary payment problems with files
on the source resource. Update yet laid out here. Since the address of
the archives at sourceforge.net dynamically generated, then make it
into the update script is problematic. Once the resource
raxp.radioliga.com will have access and will run the script.
Status: open Milestone: 1.0 Created: Thu Jun 05, 2014 01:14 PM UTC by ar8001 Last Updated: Sat Jun 07, 2014 10:39 AM UTC Owner: nobody
How i can start und Stop the realtime spectrum on a tablet?
i cand find a menu or a start/stop button
i have no chance to change the frequency …
i use a surface pro and windows 8.1
Are not you embarrassed discrepancy latest video and your screenshots?
Project on sourceforge.net laid temporary payment problems with files
on the source resource. Update yet laid out here. Since the address of
the archives at sourceforge.net dynamically generated, then make it
into the update script is problematic. Once the resource
raxp.radioliga.com will have access and will run the script.
Status: open Milestone: 1.0 Created: Thu Jun 05, 2014 01:14 PM UTC by ar8001 Last Updated: Sat Jun 07, 2014 10:39 AM UTC Owner: nobody
How i can start und Stop the realtime spectrum on a tablet?
i cand find a menu or a start/stop button
i have no chance to change the frequency …
i use a surface pro and windows 8.1
Are not you embarrassed discrepancy latest video and your screenshots?
Project on sourceforge.net laid temporary payment problems with files
on the source resource. Update yet laid out here. Since the address of
the archives at sourceforge.net dynamically generated, then make it
into the update script is problematic. Once the resource
raxp.radioliga.com will have access and will run the script.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
ohhhaaa…now i see the problem, your update-tool doesn't work!
i download and copy alle files manuel now … and now i get a newer version, and now i see the play and hold button .. and .. the button works now hurraaaaaa :)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
its not possible to enter new frequencys - if i try to enter 500MHz, i typ 5 and the value jumps to 1750Mhz ?!?!?!
Last edit: ar8001 2014-06-05
The "Stop" works as a stop-start, it means that the original is always at the start of the application, it immediately begins to interrogate RTL_POWER. To run under Windows 64 bit operating system you must install the 64 - bit drivers for tuner and a 64-bit version RTL_POWER.
Once you have selected the input window frequency in MHz, the input focus leaves. This fix cleaned archive updated. Thank you for your message.
now the input of the frequency works a bit better, but is still strange - somtimes it jumps to strange values at the stop-frequency. i think thats still the problem that you can't stop the scan. it is not possible to make a real start/stop-button?
one wish: it would be awesome if it is possible to change the size of the waterfall :)
many thanks for your work!
Be careful and reconsider all five videos on my YouTube channel http://www.youtube.com/user/LaboratoryW. Everything you say has already been implemented. The "Stop" (Stop-Start) is on the front panel itself (bottom - right cross and a hint), here it is just duplicated in the context menu.
Regarding the size of the waterfall changes (see video): it can be changed up and down as well as horizontally. In horizontal waterfall is clearly tied to the spectrum and follows him to the left, right, stretches and shrinks. For clarity uploaded screenshots https://sourceforge.net/p/guiforrrtlpower/screenshot/move%20vertical%20waterfall.PNG, https://sourceforge.net/p/guiforrrtlpower/screenshot/stop-start%20key.PNG.
ok, i see… but i think the problem is the tablet.
i testet now the X ("Stop visualisation")many times, but most time doesn't give any reaction :(
change the size of the waterfall now works, but on the tablet its very very difficult that the cusor switch to the sizetool. my feel is that the changeline is only 1 pixel?
And what kind of reaction you'd expect when you press the Stop button? When pressed poll RTL_POWER utility stops and visualization stops. Pressing the STOP - visualization continues.
Resizing waterfall always worked. No modifications to the software have been conducted. What about the width of the splitter (for vertical shear waterfall) - it is three pixels. Perhaps for the small screens of the tablet that is not enough, and I agree with you. It changed to 12 pixels. Siphon archive.
thats the problem… if i press the "stop X" …it doesn't stop! it still run and run.
it looks like that the button works only in a very short timearea, when the display on the left side change from "Load Data…" to "Config" for a very short time
If the display is "Load Data", i can push the X many times without any reaction.
for the waterfall: 12 pix is many times better to get the point with a finger or a stick
:)
i think a great feature for the future is to add some "own predefined" frequency-areas that you can fast recall some different setups (Startfreq, stopfreg, step, ppm and gain)
sorry for my bad english.
Looks like it. you do not understand how the START-STOP button. If you
press it many times, then every click you deactivate it work, then
activate. This stop-start button, and as I have mentioned many times.
Press it once - stop. press again - start again. I do not know how you
click on plansheteb but I recorded the video and show that it works.
2014-06-06 11:31 GMT+03:00, ar8001 ar8001@users.sf.net:
Related
Tickets: #1
i understand how it works … thats not the problem.
but on the tablet, the X doesn't work!!
i push the X .. the spectrum still run.
i wait a longer time .. spectrum runs
i try to push the X again … nothing, the spectrum still runs and run and run!
i think your tool doesn't recognize the -klick event on the tablet …
Testing service keys (archives updated) http://www.youtube.com/watch?v=Su75FV6BUeg
i try again … doesn't work!
i try the "right click" .. alsow, i don't get a submenu.
after that, i installed a virtual windows 7 machine on my macbook pro … on this machine the rightclick-submenu works. but not on the windows 8.1 tablet.
so, it looks that this is a problem of windows 8.1 or the pen-digitizer of the tablet!
my screen and menu looks a bit different like the screen shown in your videos …
i make some screenshots
you see … the F9 is missing
Excuse me, but I am your menu screenshots and see that you are using an older version. Archive you have not updated. On the front panel buttons have the old service will than on video, and there is no menu and click F9 hotkeys old. Be careful.
hmm, i used the update-tool that is includet ..
Are not you embarrassed discrepancy latest video and your screenshots?
Project on sourceforge.net laid temporary payment problems with files
on the source resource. Update yet laid out here. Since the address of
the archives at sourceforge.net dynamically generated, then make it
into the update script is problematic. Once the resource
raxp.radioliga.com will have access and will run the script.
2014-06-07 14:33 GMT+03:00, ar8001 ar8001@users.sf.net:
Related
Tickets: #1
Update tool works, does not work access to the archives on the
resource. You can verify this by going to the resource.
Congratulations, all you have earned :)
2014-06-07 14:42 GMT+03:00, raxp.radioliga@gmail.com raxp.radioliga@gmail.com:
Related
Tickets: #1
Are not you embarrassed discrepancy latest video and your screenshots?
Project on sourceforge.net laid temporary payment problems with files
on the source resource. Update yet laid out here. Since the address of
the archives at sourceforge.net dynamically generated, then make it
into the update script is problematic. Once the resource
raxp.radioliga.com will have access and will run the script.
ohhhaaa…now i see the problem, your update-tool doesn't work!
i download and copy alle files manuel now … and now i get a newer version, and now i see the play and hold button .. and .. the button works now hurraaaaaa :)
Update tool works, does not work access to the archives on the
resource. You can verify this by going to the resource.
Congratulations, all you have earned :)
thanks you for your help an the job for this tool!!
Glad I could help.