GUI Ping Monitor Activity
Set of usefull network utilities like ping, nslookup, etc. with GUI
Brought to you by:
maly216
Activity for GUI Ping Monitor
-
remizik posted a comment on ticket #4
Hi Kamil, is this project abandoned ?
-
s-r-grass created ticket #17
Is the project abandoned?
-
Kamil Małecki posted a comment on discussion General Discussion
Thanks, I am glad you like it :) Further to your suggestion, I will try implement them. I need to think on Carlos Nieto sugestions too. I have had discused with him a lot time ago and I need to refresh our discussion. Give me some time to improve GPM, I think that I will upload new version in circa about two or three weeks.
-
xanda escuyer posted a comment on discussion General Discussion
We like the sound of Carlos' first and second suggestions and we'd also add the following to the 'wishlist':- i) Windows installer please. ii)Ability to rRun minimised from the start. We tried seting this via a shortcut but it doesn't really work. iii) Option to allow only one instance. iv) Maybe add portscan. Superb utility - can't believe we only found it just today. Nice job so far and thank you. Keep it up.
-
Hi remizik, Are you sure that parameters of ping of both tools are the same (packet size, TTL, time out, etc.)?
-
-
Unreliable ping
-
Carlos Nieto modified a comment on discussion General Discussion
Hi Kamil, no problem! Yes, on first ping show a popup message once, which stays until the user accepts it. Should only be one pop up if at least one ping has failed after the defined threshold. For example, in my case I monitor 2 PCs that I need them to be online all the time. If the PC goes offline when I was away (at home during the night, for example) i will miss the sound notification, so the next morning when I'm back it would be good to see a pop up saying it went offline so I can go check...
-
Hi Kamil, no problem! Yes, on first ping show a popup message once, which stays until the user accepts it. Should only be one pop up if at least one ping failed. For example, in my case I monitor 2 PCs that I need them to be online all the time. If the PC goes offline when I was away (at home during the night, for example) i will miss the sound notification, so the next morning when I'm back it would be good to see a pop up saying it went offline so I can go check on it. This could be optionally...
-
scodan posted a comment on discussion General Discussion
I normally use "Basic" display mode. It would be nice to have both, but if I could only have one, I would prefer the first (hint displayed when hovering the cursor). Thank you for the reply!
-
Good idea :) I am considering to realize it as: 1. Hint displayed when user hover cursor over IP (or address) field 2. Label displayed in second line (next to ST field). Second solution could be available only in "Display mode -> Extended", first solution allow to display hint in both display modes. Which solution will be better, what do you think?
-
Good idea :) I am considering to make it as hint displayed when user hover cursor over IP (or address) field or make it as label displayed in second line (next to ST field). Second solution could be available only in "Display mode -> Extended", first solution allow to display hint in both display modes. Which solution will be better, what do you think?
-
Good idea :) I am considering to make it as hint displayed when user hover curor over IP (or address) field or make it as label displayed in second line (next to ST field). Second solution could be available only in "Display mode -> Extended", first solution allow to display hint in both display modes. Which solution will be better, what do you think?
-
Hi, Sorry for my late response, probably my mailbox treat sourceforge mails like a spam. Thanks for kind words and suggestions :) When to show popup? On first ping fail? Show once? It can be annoying if ping target will be available/unavailable in short time intervals. Play sound for all pings independly (it can be annoying)? Play sound if at least one ping failed? Look at discusion about sound notifications: https://sourceforge.net/p/gui-ping-monitor/tickets/9/. What to do when monitored device...
-
This is a suggestion, not a request. Please consider making it possible to add a label to IP address ping targets in the list. I have several IP addressees I ping, and sometimes it's hard to remember what any given IP address represents. So, the label would typically be the associated host name, but possibly some short note to explain the reason for pinging that IP address. Thank you for reading.
-
I found this little app really good. I'd like to suggest, if I may, a couple of bits that may make it even better: Show a pop up windows when a ping fails. This way the user does not need to have the main window open all the time, it can be minimized. Keep sounding the notification at an interval chosen by the user so that the user will know a ping has failed in case the user missed the initial warning. Ability to show "red" or other noticeable colored icon in the notification bar when a device went...
-
Kirill modified a comment on discussion General Discussion
Previous version 0.9.63 was used
-
The version was used 0.9.63
-
I would like to reporoduce this error. Could you sent me your configuration file (config.ini) and list of your ping targets (.pmc file). Which version of GUI Ping Monitor did you use before?
-
The new release periodically falls with an error: - System - Provider [ Name] Application...
-
Thanks!
-
redking974 modified a comment on ticket #15
Hi, I confirm that display issues have been fixed. Thanks ! By notifications (my...
-
Hi, I confirm that display issues have been fixed. Thanks ! By notifications (my...
-
Display issue
-
FlushDNS button
-
Load the list of IP's to ping when the program starts
-
Hi, I have done some improvements on adjusting forms size. All should be displayed...
-
Hi! I have added possibility to change (increase in your case) log file size limit...
-
Hi! I have added possibility to change (increase in your case) log file size limit...
-
Hi! I want to suggest increasing the size limit * .log file, since it is now limited...
-
GUI Ping Monitor released /GUI Ping Monitor/1.0.64/GUI_Ping_Monitor-1.0.64-win32.zip
-
-
-
Hi, I guess issue is not resolution but system font size. Go to "Customize your display"...
-
Display issue
-
-
-
Feature added in GPM 0.8.61.
-
Load a list file from a txt ? or csv ?
-
Copy name
-
FlushDNS button
-
Feature added in GPM 0.8.61.
-
Feature added in GPM 0.8.61.
-
Load the list of IP's to ping when the program starts
-
Load the list of IP's to ping when the program starts
-
Load the list of IP's to ping when the program starts
-
-
-
-
Hi ! glad to see you're still around :) alright then, no rush, take your time ! happy...
-
Hi remizik! I haven't much time recently, so GPM wasn't updated. But I think I will...
-
Copy name
-
any update on this ? :)
-
FlushDNS button
-
Andrew Max posted a comment on discussion General Discussion
Is it possible to load the list of IP's to ping when the program starts?
-
You are right! I will correct it :)
-
even with double spaces, mixed with commas, tab, all in the same paste ! you did...
-
NSLookup is not working as it should
-
just tried it, and i'm sorry but know it's doesn't. let me try to explain : even...
-
wow, it's works so nice ! even with double spaces, mixed with commas, tab, all in...
-
Done (v.0.7.59). Let me know if works as you expected :)
-
I have uploaded v.0.7.59. You can copy-paste multiple hosts from Excel (I have tested...
-
-
Hi! Sure, I will try to add threshold today :) Cheers
-
hi, do you think you could also add a threshold on the "ping ok" sound (notify.wav)...
-
nice, that's perfect. Thanks a lot :)
-
Probably you don't have to replace CR or LF (line jumps) by spaces in Notepad++,...
-
That'd be great. although i'm mostly working with excel files, so when I paste it,...
-
That'd be great. although i'm mostly working with excel files, so when I paste it,...
-
That'd be great. although i'm mostly working with excel files, so when I paste it,...
-
That'd be great. although i'm mostly working with excel files, so when I paste it,...
-
That'd be great. although i'm mostly working with excel files, so when I paste it,...
-
Hi! What do you say to add mutliple ping by paste them to quick ping edit line separated...
-
Load a list file from a txt ? or csv ?
-
Hi, works perfectly fine, thanks a lot ! and thanks for the credits ;) cheers
-
Ping list sorting
-
Hi! Now it should work properly. I see that you added review :) Thanks remizik! I...
-
Hi! Now it should work properly. I see that you added review :) Thanks remizik! I...
-
-
Hi ! perfect :)
-
Hi! There is (v.0.6.54) an option in Quick ping default settings that allow you to...
-
Hi! There is (v.0.6.54) an option in Quick ping default settings that allow you to...
-
-
Or maybe a floating help bubble explaining what it does ? Added (your icons used...
-
Ping list sorting
-
perfect ! I'm glad you like the icons :) if I may suggest something, you should rename...
-
perfect ! if I may suggest something, you should rename the setting in my opinion....
-
red cross button to remove one ping at a time
-
Sound notification
-
Hi, thank for icons, looks nice :) Enable/disable sound for quick ping added.
-
-
Kamil Małecki committed [2d0a7a]
Sound notifications are set individually for ea...
-
Kamil Małecki committed [53763f]
Configurable sound notifications for quick ping...
-
icons are updated :) can you also add a setting that gives us the possibility to...
-
Ok, fine! We live in the same time zone :) Cheers!
-
oh yes indeed ! I didn't pay enough attention to the settings but now I get it. That...
-
It should work, but there is a treshold 10 (by default, configurable in settings)...
-
v. 0.6.52 - check this out ;)
1 >
