From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-10 21:31:06
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified Summary: Gtk2 build segfaults in the last stage - building POD documentation Product: gnome-perl Version: unspecified Platform: Other OS/Version: All Status: UNCONFIRMED Severity: critical Priority: Normal Component: Gtk2 AssignedTo: gtk...@li... ReportedBy: ser...@ya... QAContact: gtk...@li... GNOME version: 2.11/2.12 GNOME milestone: Unspecified Steps to reproduce: 1. I can send the enveloping builder script if desired 2.=20 3.=20 Stack trace: Other information: If I'm running the build in a traditional manner, i.e. perl Makefile.PL make (not all the details are shown above), I'me getting a clean run of Makefi= le.PL (unaltered one for Gtk2-1.121) and then of 'make'. The command which fails during 'make' is this: " /usr/bin/perl5.8.7 \ ? -I blib/lib \ ? -I blib/arch \ ? -MGlib::GenPod \ ? -MGtk2 \ ? -e 'add_types ("doctypes", "/mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl= /5.8.7/i386-linux/Glib/Install/doctypes"); $Glib::GenPod::COPYRIGHT=3D"Copyright (C) 2003-2005 by the gtk2-perl team.\n\nThis software is licensed under the LGPL. See L<Gtk2> for a ful= l notice.\n"; $Glib::GenPod::MAIN_MOD=3D"Gtk2"; xsdoc2pod("build/doc.pl", "blib/lib", "build/podindex");' Segmentation fault ". I found out that there actually two 'GenPod' modules on my system: 1) " find /usr/lib/perl5/ -name "GenPod*" /usr/lib/perl5/vendor_perl/5.8.7/i386-linux/Glib/GenPod.pm [682] 0:24 se...@co...:/mnt/removable4/sergei/build_work/build/Gtk2-1.121>=20 "; 2) " find /mnt/removable4/sergei/build_work/install/Glib-1.120 -name "GenPod*" /mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl/= 5.8.7/i386-linux/Glib/GenPod.pm [683] 0:25 se...@co...:/mnt/removable4/sergei/build_work/build/Gtk2-1.121> = =20 " - the second one is the "right" one. If I change the command line to have include path to the "right" file, th= e build does not fail: " /usr/bin/perl5.8.7 \ ? -I /mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl/= 5.8.7/i386-linux \ ? -I blib/lib \ ? -I blib/arch \ ? -MGlib::GenPod \ ? -MGtk2 \ ? -e 'add_types ("doctypes", "/mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl= /5.8.7/i386-linux/Glib/Install/doctypes"); $Glib::GenPod::COPYRIGHT=3D"Copyright (C) 2003-2005 by the gtk2-perl team.\n\nThis software is licensed under the LGPL. See L<Gtk2> for a ful= l notice.\n"; $Glib::GenPod::MAIN_MOD=3D"Gtk2"; xsdoc2pod("build/doc.pl", "blib/lib", "build/podindex");' loaded 9 extra types from doctypes loaded 7 extra types from /mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl/= 5.8.7/i386-linux/Glib/Install/doctypes podifying blib/lib/Gtk2/TreeView.pod podifying blib/lib/Gtk2/WindowGroup.pod podifying blib/lib/Gtk2/VPaned.pod podifying blib/lib/Gtk2/Gdk/Pixmap.pod podifying blib/lib/Gtk2/Widget.pod podifying blib/lib/Gtk2/ActionGroup.pod podifying blib/lib/Gtk2/ItemFactory.pod podifying blib/lib/Gtk2/TreeViewColumn.pod podifying blib/lib/Gtk2/EventBox.pod podifying blib/lib/Gtk2/Gdk/PixbufAnimation.pod podifying blib/lib/Gtk2/CellRenderer.pod podifying blib/lib/Gtk2/ToggleAction.pod podifying blib/lib/Gtk2/MenuItem.pod podifying blib/lib/Gtk2/ToggleToolButton.pod podifying blib/lib/Gtk2/AboutDialog.pod podifying blib/lib/Gtk2/Pango/Fontset.pod podifying blib/lib/Gtk2/Image.pod podifying blib/lib/Gtk2/Item.pod podifying blib/lib/Gtk2/FileSelection.pod podifying blib/lib/Gtk2/Adjustment.pod podifying blib/lib/Gtk2/HSeparator.pod podifying blib/lib/Gtk2/Object.pod podifying blib/lib/Gtk2/Pango/Font.pod podifying blib/lib/Gtk2/CellView.pod podifying blib/lib/Gtk2/CellRendererText.pod podifying blib/lib/Gtk2/Gdk/Colormap.pod podifying blib/lib/Gtk2/UIManager.pod podifying blib/lib/Gtk2/InputDialog.pod podifying blib/lib/Gtk2/TextBuffer.pod podifying blib/lib/Gtk2/AspectFrame.pod podifying blib/lib/Gtk2/Gdk/DisplayManager.pod podifying blib/lib/Gtk2/Statusbar.pod podifying blib/lib/Gtk2/Tooltips.pod podifying blib/lib/Gtk2/Paned.pod podifying blib/lib/Gtk2/Gdk/DragContext.pod podifying blib/lib/Gtk2/Notebook.pod podifying blib/lib/Gtk2/Pango/FontFamily.pod podifying blib/lib/Gtk2/FileChooserDialog.pod list is not registered with the GLib type system. podifying blib/lib/Gtk2/Separator.pod podifying blib/lib/Gtk2/ListStore.pod podifying blib/lib/Gtk2/Gdk/PixbufLoader.pod GdkPixbufForm. GdkPixbufForm. podifying blib/lib/Gtk2/VBox.pod podifying blib/lib/Gtk2/Gdk/Drawable.pod podifying blib/lib/Gtk2/Frame.pod podifying blib/lib/Gtk2/Socket.pod podifying blib/lib/Gtk2/GammaCurve.pod podifying blib/lib/Gtk2/ToolItem.pod podifying blib/lib/Gtk2/TextChildAnchor.pod podifying blib/lib/Gtk2/Misc.pod podifying blib/lib/Gtk2/Pango/FontMap.pod podifying blib/lib/Gtk2/HandleBox.pod podifying blib/lib/Gtk2/ListItem.pod podifying blib/lib/Gtk2/Window.pod podifying blib/lib/Gtk2/Label.pod podifying blib/lib/Gtk2/Container.pod podifying blib/lib/Gtk2/Style.pod podifying blib/lib/Gtk2/MenuBar.pod podifying blib/lib/Gtk2/Gdk/Keymap.pod podifying blib/lib/Gtk2/Range.pod podifying blib/lib/Gtk2/Action.pod podifying blib/lib/Gtk2/TreeModelSort.pod podifying blib/lib/Gtk2/HScrollbar.pod podifying blib/lib/Gtk2/Calendar.pod podifying blib/lib/Gtk2/Clipboard.pod podifying blib/lib/Gtk2/ToggleButton.pod podifying blib/lib/Gtk2/RadioAction.pod podifying blib/lib/Gtk2/HPaned.pod podifying blib/lib/Gtk2/Table.pod podifying blib/lib/Gtk2/HScale.pod podifying blib/lib/Gtk2/ColorSelection.pod podifying blib/lib/Gtk2/ButtonBox.pod podifying blib/lib/Gtk2/Scrollbar.pod podifying blib/lib/Gtk2/RadioButton.pod podifying blib/lib/Gtk2/CellRendererProgress.pod podifying blib/lib/Gtk2/ComboBox.pod podifying blib/lib/Gtk2/CheckButton.pod podifying blib/lib/Gtk2/Pango/FontFace.pod podifying blib/lib/Gtk2/VScrollbar.pod podifying blib/lib/Gtk2/CellRendererPixbuf.pod podifying blib/lib/Gtk2/Pango/Context.pod podifying blib/lib/Gtk2/Invisible.pod podifying blib/lib/Gtk2/FontSelectionDialog.pod podifying blib/lib/Gtk2/Gdk/PixbufSimpleAnim.pod podifying blib/lib/Gtk2/Pango/Layout.pod podifying blib/lib/Gtk2/RadioToolButton.pod podifying blib/lib/Gtk2/TreeModelFilter.pod podifying blib/lib/Gtk2/Toolbar.pod podifying blib/lib/Gtk2/Gdk/GC.pod podifying blib/lib/Gtk2/Box.pod podifying blib/lib/Gtk2/HRuler.pod podifying blib/lib/Gtk2/TextTag.pod podifying blib/lib/Gtk2/ProgressBar.pod podifying blib/lib/Gtk2/FileChooserButton.pod podifying blib/lib/Gtk2/Gdk/Visual.pod podifying blib/lib/Gtk2/Gdk/Window.pod podifying blib/lib/Gtk2/Scale.pod podifying blib/lib/Gtk2/Gdk/PangoRenderer.pod podifying blib/lib/Gtk2/MenuShell.pod podifying blib/lib/Gtk2/VScale.pod podifying blib/lib/Gtk2/Ruler.pod podifying blib/lib/Gtk2/VRuler.pod podifying blib/lib/Gtk2/HBox.pod podifying blib/lib/Gtk2/MenuToolButton.pod podifying blib/lib/Gtk2/MessageDialog.pod podifying blib/lib/Gtk2/Gdk/Display.pod podifying blib/lib/Gtk2/Expander.pod podifying blib/lib/Gtk2/EntryCompletion.pod podifying blib/lib/Gtk2/VButtonBox.pod podifying blib/lib/Gtk2/AccelMap.pod podifying blib/lib/Gtk2/SeparatorMenuItem.pod podifying blib/lib/Gtk2/DrawingArea.pod podifying blib/lib/Gtk2/TreeStore.pod podifying blib/lib/Gtk2/IconView.pod podifying blib/lib/Gtk2/SizeGroup.pod podifying blib/lib/Gtk2/Viewport.pod podifying blib/lib/Gtk2/ImageMenuItem.pod podifying blib/lib/Gtk2/IconTheme.pod podifying blib/lib/Gtk2/AccelLabel.pod podifying blib/lib/Gtk2/ScrolledWindow.pod podifying blib/lib/Gtk2/ToolButton.pod podifying blib/lib/Gtk2/Gdk/Pixbuf.pod !! is not registered with the GLib type system. !! is not registered with the GLib type system. podifying blib/lib/Gtk2/HButtonBox.pod podifying blib/lib/Gtk2/Gdk/Bitmap.pod podifying blib/lib/Gtk2/Dialog.pod podifying blib/lib/Gtk2/Entry.pod podifying blib/lib/Gtk2/Gdk/Screen.pod podifying blib/lib/Gtk2/ComboBoxEntry.pod podifying blib/lib/Gtk2/Pango/Renderer.pod podifying blib/lib/Gtk2/ColorButton.pod podifying blib/lib/Gtk2/TextMark.pod podifying blib/lib/Gtk2/RcStyle.pod podifying blib/lib/Gtk2/CellRendererCombo.pod podifying blib/lib/Gtk2/TreeSelection.pod podifying blib/lib/Gtk2/ColorSelectionDialog.pod podifying blib/lib/Gtk2/TearoffMenuItem.pod podifying blib/lib/Gtk2/SpinButton.pod podifying blib/lib/Gtk2/OptionMenu.pod podifying blib/lib/Gtk2/TextTagTable.pod podifying blib/lib/Gtk2/FileChooserWidget.pod podifying blib/lib/Gtk2/SeparatorToolItem.pod podifying blib/lib/Gtk2/TextView.pod podifying blib/lib/Gtk2/Gdk/Device.pod podifying blib/lib/Gtk2/Alignment.pod podifying blib/lib/Gtk2/CheckMenuItem.pod podifying blib/lib/Gtk2/FontSelection.pod podifying blib/lib/Gtk2/IconFactory.pod podifying blib/lib/Gtk2/Arrow.pod podifying blib/lib/Gtk2/Fixed.pod podifying blib/lib/Gtk2/Gdk/PixbufAnimationIter.pod podifying blib/lib/Gtk2/List.pod podifying blib/lib/Gtk2/Bin.pod podifying blib/lib/Gtk2/Layout.pod podifying blib/lib/Gtk2/VSeparator.pod podifying blib/lib/Gtk2/FileFilter.pod podifying blib/lib/Gtk2/Combo.pod podifying blib/lib/Gtk2/CellRendererToggle.pod podifying blib/lib/Gtk2/FontButton.pod podifying blib/lib/Gtk2/Plug.pod podifying blib/lib/Gtk2/Menu.pod podifying blib/lib/Gtk2/Button.pod podifying blib/lib/Gtk2/AccelGroup.pod podifying blib/lib/Gtk2/RadioMenuItem.pod podifying blib/lib/Gtk2/Curve.pod podifying blib/lib/Gtk2/IconSize.pod podifying blib/lib/Gtk2/Pango/Language.pod podifying blib/lib/Gtk2/Accelerator.pod podifying blib/lib/Gtk2/Gdk/Rectangle.pod podifying blib/lib/Gtk2/Gdk/Event/Motion.pod podifying blib/lib/Gtk2/Pango/TabArray.pod podifying blib/lib/Gtk2/TreeRowReference.pod podifying blib/lib/Gtk2/Pango/ScriptIter.pod podifying blib/lib/Gtk2/Gdk/Event/DND.pod podifying blib/lib/Gtk2/TreeDragSource.pod podifying blib/lib/Gtk2/Gdk/Event/OwnerChange.pod podifying blib/lib/Gtk2/Pango/Matrix.pod podifying blib/lib/Gtk2/TreeDragDest.pod podifying blib/lib/Gtk2/Gdk.pod podifying blib/lib/Gtk2/Gdk/X11.pod podifying blib/lib/Gtk2/Gdk/Event/GrabBroken.pod podifying blib/lib/Gtk2/TreeIter.pod podifying blib/lib/Gtk2/Pango/AttrList.pod podifying blib/lib/Gtk2/Gdk/Event/Property.pod podifying blib/lib/Gtk2/SelectionData.pod podifying blib/lib/Gtk2/GC.pod podifying blib/lib/Gtk2/Gdk/Rgb.pod podifying blib/lib/Gtk2/Gdk/Color.pod podifying blib/lib/Gtk2/IconInfo.pod podifying blib/lib/Gtk2/TreeSortable/IterCompareFunc.pod podifying blib/lib/Gtk2/Drag.pod podifying blib/lib/Gtk2/Pango/LayoutIter.pod podifying blib/lib/Gtk2/Gdk/Event/Scroll.pod podifying blib/lib/Gtk2/Gdk/Event/Proximity.pod podifying blib/lib/Gtk2/Pango.pod podifying blib/lib/Gtk2/TreeModel.pod integers is not registered with the GLib type system. podifying blib/lib/Gtk2/CellLayout.pod podifying blib/lib/Gtk2/Requisition.pod podifying blib/lib/Gtk2/TextAttributes.pod podifying blib/lib/Gtk2/TextIter.pod podifying blib/lib/Gtk2/Gdk/Event/Expose.pod podifying blib/lib/Gtk2/Gdk/Event/Visibility.pod podifying blib/lib/Gtk2/Gdk/Cursor.pod podifying blib/lib/Gtk2/Gdk/Input.pod podifying blib/lib/Gtk2/Gdk/Event/Client.pod podifying blib/lib/Gtk2/Stock.pod unable to open build/stock_items.podi for inclusion, at xs/GtkStock.xs:10= 2 at -e line 1 podifying blib/lib/Gtk2/Editable.pod podifying blib/lib/Gtk2/Pango/FontMetrics.pod podifying blib/lib/Gtk2/Gdk/Event/Setting.pod podifying blib/lib/Gtk2/Gdk/Event.pod timestamp is not registered with the GLib type system. timestamp is not registered with the GLib type system. podifying blib/lib/Gtk2/Gdk/Event/Configure.pod podifying blib/lib/Gtk2/Gdk/Atom.pod podifying blib/lib/Gtk2/Gdk/Selection.pod podifying blib/lib/Gtk2/Selection.pod podifying blib/lib/Gtk2/Gdk/PixbufFormat.pod GdkPixbufForm. podifying blib/lib/Gtk2/Gdk/Region.pod podifying blib/lib/Gtk2/main.pod podifying blib/lib/Gtk2/version.pod podifying blib/lib/Gtk2/TreeSortable.pod podifying blib/lib/Gtk2/TargetList.pod podifying blib/lib/Gtk2/Rc.pod podifying blib/lib/Gtk2/Gdk/Threads.pod podifying blib/lib/Gtk2/CellEditable.pod podifying blib/lib/Gtk2/Gdk/Event/WindowState.pod podifying blib/lib/Gtk2/Gdk/Geometry.pod podifying blib/lib/Gtk2/TargetEntry.pod podifying blib/lib/Gtk2/TreePath.pod podifying blib/lib/Gtk2/IconSet.pod podifying blib/lib/Gtk2/Gdk/Event/NoExpose.pod podifying blib/lib/Gtk2/Gdk/Event/Key.pod podifying blib/lib/Gtk2/Pango/version.pod podifying blib/lib/Gtk2/Gdk/Event/Selection.pod podifying blib/lib/Gtk2/IconSource.pod podifying blib/lib/Gtk2/Pango/Script.pod podifying blib/lib/Gtk2/Gdk/Event/Button.pod podifying blib/lib/Gtk2/Gdk/Event/Crossing.pod podifying blib/lib/Gtk2/Gdk/Event/Focus.pod podifying blib/lib/Gtk2/Pango/FontDescription.pod podifying blib/lib/Gtk2/FileChooser.pod [684] 0:27 se...@co...:/mnt/removable4/sergei/build_work/build/Gtk2-1.121> = =20 ". I believe it's a flaw in Gtk2 build system - on other occasions the speci= fied by myself include directoris are honored - please wait a little, I'll upl= oad the Makefile generated by 'perl Makefile.PL'. I think that honoring user provided include path for POD building will re= solve the issue. --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-10 21:36:23
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #1 from Sergei Steshenko 2006-05-10 21:36 UTC ------- Created an attachment (id=3D65203) --> (http://bugzilla.gnome.org/attachment.cgi?id=3D65203&action=3Dview) the failing Makefile Please pay attention to lines #690..691, for example - in these line the correct location of Glib is reflected. The failing target: 2158 build/podindex :: $(BLIB_DONE) Makefile build/doc.pl 2159 /usr/bin/perl5.8.7 -I $(INST_LIB) -I $(INST_ARCHLIB) -MGlib::GenPod -M$(NAME) \ 2160 -e 'add_types ("doctypes", "/mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl= /5.8.7/i386-linux/Glib/Install/doctypes"); $$Glib::GenPod::COPYRIGHT=3D" 2160 Copyright (C) 2003-2005 by the gtk2-perl team.\n\nThis software i= s licensed under the LGPL. See L<Gtk2> for a full notice.\n"; $$Glib::GenPod::MAIN_MOD=3D"Gtk2"; $(POD_SET) xsdoc2pod("buil 2160 d/doc.pl", "$(INST_LIB)", "build/podindex");' --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-11 00:20:51
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified muppet changed: What |Removed |Added -------------------------------------------------------------------------= --- CC| |sc...@as... ------- Comment #2 from muppet 2006-05-11 00:20 UTC ------- The segfault of perl in the docgen is troubling. Two pieces of information would help very helpful: 1. You said that the Glib::GenPod from /usr/lib is being picked up inste= ad of the one from the expected nonstandard location. What is the version stri= ng inside that module? E.g., $ grep VERSION /usr/lib/perl5/vendor_perl/5.8.7/i386-linux/Glib/GenPod= .pm 2. If inspecting the differences between those doesn't tell us what's wr= ong, it will be instructive to see the stack trace from perl. Something along= the lines of $ ulimit -c unlimited # enable core dumps $ $failing_build_command $ gdb /usr/bin/perl5.8.7 core.* (gdb) backtrace > I believe it's a flaw in Gtk2 build system - on other occasions the spe= cified > by myself include directoris are honored - please wait a little, I'll u= pload > the Makefile generated by 'perl Makefile.PL'. >=20 > I think that honoring user provided include path for POD building will = resolve > the issue. The command line to run xsdocparse() is placed into the makefile by code = in Glib::MakeHelper::postamble_docs_full(). =20 # documentation stuff build/doc.pl :: Makefile @xs_files $^X -I \$(INST_LIB) -I \$(INST_ARCHLIB) -MGlib::ParseXSDoc \\ -e 'xsdocparse (qw(@xs_files))' > \$@ Where $^X is "The name used to execute the current copy of Perl, from C's "argv[0]"" (see perlvar(1)). MakeMaker does not propagate the @INC of = the current interpreter to any invocations of $^X in the code it writes, so w= e did not either. It is expected that the PERL5LIB environment variable contai= ns the correct paths to reach dependencies. This is not unique to Gtk2. --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-11 20:55:46
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #3 from Sergei Steshenko 2006-05-11 20:55 UTC ------- Here is the version of system Glib/GenPod.pm : " grep VERSION /usr/lib/perl5/vendor_perl/5.8.7/i386-linux/Glib/GenPod.pm our $VERSION =3D '0.02'; unless (Glib->CHECK_VERSION (2, 4, 0)) { " --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-11 21:02:41
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #4 from Sergei Steshenko 2006-05-11 21:02 UTC ------- I do not think gdb backtrace command is showing anything useful. Here is what I did: 1) ulimit -c unlimited 2) " /usr/bin/perl5.8.7 -I blib/lib -I blib/arch -MGlib::GenPod -MGtk2 -e 'add= _types ("doctypes", "/mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl= /5.8.7/i386-linux/Glib/Install/doctypes"); $Glib::GenPod::COPYRIGHT=3D"Copyright (C) 2003-2005 by the gtk2-perl team.\n\nThis software is licensed under the LGPL. See L<Gtk2> for a ful= l notice.\n"; $Glib::GenPod::MAIN_MOD=3D"Gtk2"; xsdoc2pod("build/doc.pl", "blib/lib", "build/podindex");' Segmentation fault (core dumped) " 3) " ls -ltr ... -rw------- 1 sergei sergei 2322432 May 11 23:57 core.1067 " 4) gdb /usr/bin/perl5.8.7 core.1067 GNU gdb 6.3-5mdk (Mandriva Linux release 2006.0) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you = are welcome to change it and/or distribute copies of it under certain conditi= ons. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for detail= s. This GDB was configured as "i586-mandriva-linux-gnu"...(no debugging symb= ols found) Using host libthread_db library "/lib/tls/libthread_db.so.1". Reading symbols from shared object read from target memory...(no debuggin= g symbols found)...done. Loaded system supplied DSO at 0xffffe000 Core was generated by `/usr/bin/perl5.8.7 -I blib/lib -I blib/arch -MGlib::GenPod -MGtk2 -e add_types'. Program terminated with signal 11, Segmentation fault. warning: svr4_current_sos: Can't read pathname for load map: Input/output= error Reading symbols from /usr/lib/perl5/5.8.7/i386-linux/CORE/libperl.so...(n= o debugging symbols found)...done. Loaded symbols for /usr/lib/perl5/5.8.7/i386-linux/CORE/libperl.so Reading symbols from /lib/libnsl.so.1...(no debugging symbols found)...do= ne. Loaded symbols for /lib/libnsl.so.1 Reading symbols from /lib/libdl.so.2...(no debugging symbols found)...don= e. Loaded symbols for /lib/libdl.so.2 Reading symbols from /lib/tls/libm.so.6...(no debugging symbols found)...= done. Loaded symbols for /lib/tls/libm.so.6 Reading symbols from /lib/libcrypt.so.1...(no debugging symbols found)...= done. Loaded symbols for /lib/libcrypt.so.1 Reading symbols from /lib/libutil.so.1...(no debugging symbols found)...d= one. Loaded symbols for /lib/libutil.so.1 Reading symbols from /lib/tls/libc.so.6... (no debugging symbols found)...done. Loaded symbols for /lib/tls/libc.so.6 Reading symbols from /lib/ld-linux.so.2...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /usr/lib/perl5/5.8.7/i386-linux/auto/Data/Dumper/Dumper.so...done. Loaded symbols for /usr/lib/perl5/5.8.7/i386-linux/auto/Data/Dumper/Dumpe= r.so Reading symbols from /usr/lib/perl5/5.8.7/i386-linux/auto/POSIX/POSIX.so...done. Loaded symbols for /usr/lib/perl5/5.8.7/i386-linux/auto/POSIX/POSIX.so Reading symbols from /usr/lib/perl5/vendor_perl/5.8.7/i386-linux/auto/Glib/Glib.so...done. Loaded symbols for /usr/lib/perl5/vendor_perl/5.8.7/i386-linux/auto/Glib/Glib.so Reading symbols from /usr/lib/libgobject-2.0.so.0...done. Loaded symbols for /usr/lib/libgobject-2.0.so.0 Reading symbols from /usr/lib/libglib-2.0.so.0...done. Loaded symbols for /usr/lib/libglib-2.0.so.0 Reading symbols from /usr/lib/libgthread-2.0.so.0...done. Loaded symbols for /usr/lib/libgthread-2.0.so.0 Reading symbols from /lib/tls/libpthread.so.0...done. Loaded symbols for /lib/tls/libpthread.so.0 Reading symbols from /mnt/removable4/sergei/build_work/build/Gtk2-1.121/blib/arch/auto/Gtk2/Gt= k2.so...done. Loaded symbols for blib/arch/auto/Gtk2/Gtk2.so Reading symbols from /mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib/libgtk-x11-2.0.= so.0...done. Loaded symbols for /mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib/libgtk-x11-2.0.= so.0 Reading symbols from /mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib/libgdk-x11-2.0.= so.0...done. Loaded symbols for /mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib/libgdk-x11-2.0.= so.0 Reading symbols from /mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/libatk-1.0.so.0.= ..done. Loaded symbols for /mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/libatk-1.0.so.0 Reading symbols from /mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib/libgdk_pixbuf-2= .0.so.0...done. Loaded symbols for /mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib/libgdk_pixbuf-2= .0.so.0 Reading symbols from /mnt/removable4/sergei/build_work/install/pango-1.12.1/lib/libpangocairo-= 1.0.so.0...done. Loaded symbols for /mnt/removable4/sergei/build_work/install/pango-1.12.1/lib/libpangocairo-= 1.0.so.0 Reading symbols from /mnt/removable4/sergei/build_work/install/pango-1.12.1/lib/libpango-1.0.s= o.0...done. Loaded symbols for /mnt/removable4/sergei/build_work/install/pango-1.12.1/lib/libpango-1.0.s= o.0 Reading symbols from /mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/libcairo.so.2..= .done. Loaded symbols for /mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/libcairo.so.2 Reading symbols from /mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/libgmodule-2.0.= so.0...done. Loaded symbols for /mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/libgmodule-2.0.= so.0 Reading symbols from /usr/lib/libfreetype.so.6...done. Loaded symbols for /usr/lib/libfreetype.so.6 Reading symbols from /usr/lib/libfontconfig.so.1...done. Loaded symbols for /usr/lib/libfontconfig.so.1 Reading symbols from /usr/X11R6/lib/libXrender.so.1...done. Loaded symbols for /usr/X11R6/lib/libXrender.so.1 Reading symbols from /usr/X11R6/lib/libX11.so.6...done. Loaded symbols for /usr/X11R6/lib/libX11.so.6 Reading symbols from /usr/X11R6/lib/libXext.so.6...done. Loaded symbols for /usr/X11R6/lib/libXext.so.6 Reading symbols from /usr/lib/libpng12.so.0...done. Loaded symbols for /usr/lib/libpng12.so.0 Reading symbols from /lib/libz.so.1...done. Loaded symbols for /lib/libz.so.1 Reading symbols from /usr/X11R6/lib/libXrandr.so.2...done. Loaded symbols for /usr/X11R6/lib/libXrandr.so.2 Reading symbols from /usr/X11R6/lib/libXinerama.so.1...done. Loaded symbols for /usr/X11R6/lib/libXinerama.so.1 Reading symbols from /usr/X11R6/lib/libXcursor.so.1...done. Loaded symbols for /usr/X11R6/lib/libXcursor.so.1 Reading symbols from /usr/X11R6/lib/libXfixes.so.3...done. Loaded symbols for /usr/X11R6/lib/libXfixes.so.3 Reading symbols from /mnt/removable4/sergei/build_work/install/pango-1.12.1/lib/libpangoft2-1.= 0.so.0...done. Loaded symbols for /mnt/removable4/sergei/build_work/install/pango-1.12.1/lib/libpangoft2-1.= 0.so.0 Reading symbols from /usr/lib/libexpat.so.0...done. Loaded symbols for /usr/lib/libexpat.so.0 #0 0x000000a4 in ?? () (gdb) backtrace #0 0x000000a4 in ?? () #1 0x00000000 in ?? () (gdb) --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-12 00:22:13
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #5 from muppet 2006-05-12 00:21 UTC ------- (In reply to comment #3) > our $VERSION =3D '0.02'; Oi. This is what i get for not sleeping enough. I should've asked for t= he version in /usr/lib/perl5/vendor_perl/5.8.7/i386-linux/Glib.pm . Sorry. --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-12 00:33:28
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #6 from muppet 2006-05-12 00:33 UTC ------- (In reply to comment #4) > I do not think gdb backtrace command is showing anything useful. It looks like the stack is hosed, or at least gdb can't grok it. > Loaded symbols for > /usr/lib/perl5/vendor_perl/5.8.7/i386-linux/auto/Glib/Glib.so ... > Loaded symbols for /usr/lib/libgobject-2.0.so.0 ... > Loaded symbols for blib/arch/auto/Gtk2/Gtk2.so ... > Loaded symbols for > /mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib/libgtk-x11-2.= 0.so.0 This, however, may be hinting at the problem. Do you also have a /mnt/removable4/sergei/build_work/install/glib-2.x.xx/lib/libgobject-2.0.= so.0?=20 Is that the one that your gtk+ should be linking against? What are the versions of the one in /usr/lib and the one in /.../build_work/../glib...= ? It's possible that there is some evil and nasty thing going on with versi= on mismatches. I'm guessing it's something like this: your environment doesn't include = a PERL5LIB setting to tell perl where to find the same Glib that you config= ured to build against at Makefile.PL time. Therefore, perl finds the one in t= he perl standard library. When it loads that module, it also loads the libg= lib and libgobject against which it is linked. IIRC, perl links extensions w= ith -rpath, so it will find the one in /usr/lib instead of looking through LD_LIBRARY_PATH. Then perl finds the uninstalled Gtk2.so in blib, and lo= ads the libgtk+ against which it was linked, which is in your build/install location. The gtk+ library expects to be used with a newer gobject than = is loaded, and when Glib::GenPod attempts to query the gobject type system t= o get information for the docs, something goes boom. To test this theory, could you try setting PERL5LIB to include the proper= paths and rerunning "make"? --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-12 01:14:53
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #7 from Sergei Steshenko 2006-05-12 01:14 UTC ------- (In reply to comment #6) > (In reply to comment #4) > > I do not think gdb backtrace command is showing anything useful. >=20 > It looks like the stack is hosed, or at least gdb can't grok it. >=20 > > Loaded symbols for > > /usr/lib/perl5/vendor_perl/5.8.7/i386-linux/auto/Glib/Glib.so > ... > > Loaded symbols for /usr/lib/libgobject-2.0.so.0 > ... > > Loaded symbols for blib/arch/auto/Gtk2/Gtk2.so > ... > > Loaded symbols for > > /mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib/libgtk-x11-= 2.0.so.0 >=20 > This, however, may be hinting at the problem. >=20 > Do you also have a > /mnt/removable4/sergei/build_work/install/glib-2.x.xx/lib/libgobject-2.= 0.so.0?=20 > Is that the one that your gtk+ should be linking against? What are the > versions of the one in /usr/lib and the one in /.../build_work/../glib.= .. ? >=20 > It's possible that there is some evil and nasty thing going on with ver= sion > mismatches. >=20 > I'm guessing it's something like this: your environment doesn't includ= e a > PERL5LIB setting to tell perl where to find the same Glib that you conf= igured > to build against at Makefile.PL time. Therefore, perl finds the one in= the > perl standard library. When it loads that module, it also loads the li= bglib > and libgobject against which it is linked. IIRC, perl links extensions= with > -rpath, so it will find the one in /usr/lib instead of looking through > LD_LIBRARY_PATH. Then perl finds the uninstalled Gtk2.so in blib, and = loads > the libgtk+ against which it was linked, which is in your build/install > location. The gtk+ library expects to be used with a newer gobject tha= n is > loaded, and when Glib::GenPod attempts to query the gobject type system= to get > information for the docs, something goes boom. >=20 >=20 > To test this theory, could you try setting PERL5LIB to include the prop= er paths > and rerunning "make"? >=20 I am not sure I understand "where you are heading". My script is intended to build the following: gtk2 (the "C" library) and all its dependencies; wxwidgets based on the above; wxperl based on the above gtk2-perl based on the above. All builing occurs under /mnt/removable4/sergei/build_work/build : " ls -F /mnt/removable4/sergei/build_work/build atk-1.10.3/ Cairo-0.03.unpackage.log Glib-1.120.tar.gz = =20 Gtk2-1.121/ gtk+-2.8.17.unpackage.log Wx-0.26.tar.gz atk-1.10.3.tar.gz cairo-1.0.4/ Glib-1.120.unpackage= .log =20 Gtk2-1.121.tar.gz pango-1.12.1/ Wx-0.26.unpackage.l= og atk-1.10.3.unpackage.log cairo-1.0.4.tar.gz glib-2.10.1/ = =20 Gtk2-1.121.unpackage.log pango-1.12.1.tar.gz wxGTK-2.6.3/ Cairo-0.03/ cairo-1.0.4.unpackage.log glib-2.10.1.tar.gz = =20 gtk+-2.8.17/ pango-1.12.1.unpackage.log wxGTK-2.6.3.tar.gz Cairo-0.03.tar.gz Glib-1.120/ glib-2.10.1.unpackag= e.log=20 gtk+-2.8.17.tar.gz Wx-0.26/ wxGTK-2.6.3.unpacka= ge.log [47] 3:48 se...@co...:/ibm/home/sergei> "; all installation occurs under /mnt/removable4/sergei/build_work/install : " ls -F /mnt/removable4/sergei/build_work/install atk-1.10.3/ Cairo-0.03/ cairo-1.0.4/ Glib-1.120/ glib-2.10.1/ gtk+-2= .8.17/ pango-1.12.1/ Wx-0.26/ wxGTK-2.6.3/ ". So the answer to: " Do you also have a /mnt/removable4/sergei/build_work/install/glib-2.x.xx/lib/libgobject-2.0.= so.0? " is: " find /mnt/removable4/sergei/build_work/install/glib-2* -type f | grep "\.= so" /mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/libglib-2.0.so.= 0.1000.1 /mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/libgobject-2.0.= so.0.1000.1 /mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/libgmodule-2.0.= so.0.1000.1 /mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/libgthread-2.0.= so.0.1000.1 ". There is only glib-2.10.1 under /mnt/removable4/sergei/build_work/install/ and no other versions of glib. No, I'm not using PERL5LIB environment variable - after working for A Ver= y Well Known Semiconductor Company which used to have development environme= nt with more than 400 environment variables, and the environment couldn't fi= t into standard shells, and they had to recompile them from scratch, and I had mysterious failure which could be reproduced only adding apparently unrelated environment varibales (i.e. the failured were to environment ov= erlap or screwup) I have a very strong to environment variables. Actually, I had it before, the above experience just made it even stronge= r. For me usage of environment variables is an indication that no decent mechanism was thought of. I believe I found (dirty) workaround for the problem: 1) a sh wrapper around Perl in current directory " #!/bin/sh -f /usr/bin/perl5.8.7 -I /mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl/= 5.8.7/i386-linux "$@" 2) replacing in my case /usr/bin/perl5.8.7 with the above './perl' - both actions will be performed automatically by my build script; the ac= tual set of -I <path> will be generated per Perl module to be built. The build script is recursive; the directories under /mnt/removable4/sergei/build_work/install reflect what can already be successfully built. Anyway, IIRC, the Gtk modules documentation mentions PERL5LIB as a possib= ility, not as a must. So, I am pursuing a command line options option - again, in many places in Makefile the supplied -I <path> are correctly reflected. Do you want me to upload my script ? It is run as /ibm/home/sergei/gtk_wx_perl_builder/20060510/bin/build.pl > & build.log = & (the script directory maybe any, it's self-contained directory structure). It produces detailed log file, so one can see every command line executed through Perl 'system'. Environment is set only in the forked processess, e.g.: " build.pl :INFO: building 'Gtk2' target build.pl :INFO: unpackaging Gtk2-1.121.tar.gz, log file will be '/mnt/removable4/sergei/build_work/build/Gtk2-1.121.unpackage.log' build.pl :INFO: executing =3D=3D> \cd /mnt/removable4/sergei/build_work/b= uild; tar zxvf Gtk2-1.121.tar.gz 1>Gtk2-1.121.unpackage.log 2>&1 build.pl :INFO: it has been found that this 'Gtk2' target depends on the following targets: Glib atk cairo glib gtk+ pango build.pl :WARNING: have no other choice, but to start heuristic dependenc= y search for LD_LIBRARY_PATH environment variable contents build.pl :INFO: checking *.pc files $pkgconfig_dir=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/lib= /pkgconfig for $next_level_target=3DGlib build.pl :WARNING: '/mnt/removable4/sergei/build_work/install/Glib-1.120/lib/pkgconfig' dire= ctory does not exist build.pl :INFO: checking *.pc files $pkgconfig_dir=3D/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib= /pkgconfig for $next_level_target=3Datk build.pl :INFO: found 'atk.pc' file, assuming 'atk' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L atk' comm= and build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib =20 build.pl :INFO: checking *.pc files $pkgconfig_dir=3D/mnt/removable4/sergei/build_work/install/cairo-1.0.4/li= b/pkgconfig for $next_level_target=3Dcairo build.pl :INFO: found 'cairo.pc' file, assuming 'cairo' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L cairo' co= mmand build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib -L/usr/X11R6/= lib =20 build.pl :INFO: checking *.pc files $pkgconfig_dir=3D/mnt/removable4/sergei/build_work/install/glib-2.10.1/li= b/pkgconfig for $next_level_target=3Dglib build.pl :INFO: found 'glib-2.0.pc' file, assuming 'glib-2.0' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L glib-2.0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib =20 build.pl :INFO: found 'gobject-2.0.pc' file, assuming 'gobject-2.0' libra= ry build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gobject-2= .0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib =20 build.pl :INFO: found 'gmodule-2.0.pc' file, assuming 'gmodule-2.0' libra= ry build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gmodule-2= .0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib =20 build.pl :INFO: found 'gmodule-export-2.0.pc' file, assuming 'gmodule-export-2.0' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gmodule-export-2.0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib =20 build.pl :INFO: found 'gmodule-no-export-2.0.pc' file, assuming 'gmodule-no-export-2.0' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gmodule-no-export-2.0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib =20 build.pl :INFO: found 'gthread-2.0.pc' file, assuming 'gthread-2.0' libra= ry build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gthread-2= .0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib =20 build.pl :INFO: checking *.pc files $pkgconfig_dir=3D/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/li= b/pkgconfig for $next_level_target=3Dgtk+ build.pl :INFO: found 'gdk-pixbuf-xlib-2.0.pc' file, assuming 'gdk-pixbuf-xlib-2.0' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gdk-pixbuf-xlib-2.0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib =20 build.pl :INFO: found 'gdk-pixbuf-2.0.pc' file, assuming 'gdk-pixbuf-2.0' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gdk-pixbu= f-2.0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib =20 build.pl :INFO: found 'gdk-x11-2.0.pc' file, assuming 'gdk-x11-2.0' libra= ry build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gdk-x11-2= .0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib -L/usr/X11R6= /lib =20 build.pl :INFO: found 'gtk+-x11-2.0.pc' file, assuming 'gtk+-x11-2.0' lib= rary build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gtk+-x11-= 2.0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib -L/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib -L/usr/X11R6= /lib =20 build.pl :INFO: found 'gdk-2.0.pc' file, assuming 'gdk-2.0' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gdk-2.0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib -L/usr/X11R6= /lib =20 build.pl :INFO: found 'gtk+-2.0.pc' file, assuming 'gtk+-2.0' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L gtk+-2.0' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib -L/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib -L/usr/X11R6= /lib =20 build.pl :INFO: checking *.pc files $pkgconfig_dir=3D/mnt/removable4/sergei/build_work/install/pango-1.12.1/l= ib/pkgconfig for $next_level_target=3Dpango build.pl :INFO: found 'pango.pc' file, assuming 'pango' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L pango' co= mmand build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib =20 build.pl :INFO: found 'pangocairo.pc' file, assuming 'pangocairo' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L pangocair= o' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib -L/usr/X11R6= /lib =20 build.pl :INFO: found 'pangox.pc' file, assuming 'pangox' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L pangox' c= ommand build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib =20 build.pl :INFO: found 'pangoxft.pc' file, assuming 'pangoxft' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L pangoxft' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib =20 build.pl :INFO: found 'pangoft2.pc' file, assuming 'pangoft2' library build.pl :INFO: going to grab STDOUT from 'PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/l= ib/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkg= config:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfi= g:/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mn= t/removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/rem= ovable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; pkg-config --print-errors --libs-only-L pangoft2' command build.pl :INFO: STDOUT of the above command was: -L/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib -L/mnt/removable4/sergei/build_work/install/pango-1.12.1/lib =20 build.pl :INFO: for 'Gtk2' target directories with .pm files of targets i= t depends on are: /mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl/= 5.8.7/i386-linux build.pl :INFO: 'perl Makefile.pl' for 'Gtk2' target is about to be run, = log file will be '/mnt/removable4/sergei/build_work/build/Gtk2-1.121/Makefile.PL.log' build.pl executing =3D=3D> cd /mnt/removable4/sergei/build_work/build/Gtk= 2-1.121; PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/bin:/mnt/remo= vable4/sergei/build_work/install/atk-1.10.3/bin:/mnt/removable4/sergei/bu= ild_work/install/cairo-1.0.4/bin:/mnt/removable4/sergei/build_work/instal= l/glib-2.10.1/bin:/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/b= in:/mnt/removable4/sergei/build_work/install/pango-1.12.1/bin:/usr/sbin:/= sbin:/usr/local/bin:/usr/bin:/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin/= :/usr/games:/ibm/home/sergei/bin:/usr/lib/ssh; export PATH; LD_LIBRARY_PATH=3D/mnt/removable4/sergei/build_work/install/atk-1.10.3/li= b:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib:/mnt/removabl= e4/sergei/build_work/install/glib-2.10.1/lib:/mnt/removable4/sergei/build= _work/install/gtk+-2.8.17/lib:/mnt/removable4/sergei/build_work/install/p= ango-1.12.1/lib:/usr/X11R6/lib; export LD_LIBRARY_PATH; PKG_CONFIG_PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/li= b/pkgconfig:/mnt/removable4/sergei/build_work/install/atk-1.10.3/lib/pkgc= onfig:/mnt/removable4/sergei/build_work/install/cairo-1.0.4/lib/pkgconfig= :/mnt/removable4/sergei/build_work/install/glib-2.10.1/lib/pkgconfig:/mnt= /removable4/sergei/build_work/install/gtk+-2.8.17/lib/pkgconfig:/mnt/remo= vable4/sergei/build_work/install/pango-1.12.1/lib/pkgconfig; export PKG_CONFIG_PATH; /usr/bin/perl5.8.7 -w -I . -I /mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_perl/= 5.8.7/i386-linux Makefile.PL --debug PREFIX=3D/mnt/removable4/sergei/build_work/install/Gt= k2-1.121 1>Makefile.PL.log 2>&1 build.pl :INFO: 'make' for 'Gtk2' target is about to be run, log file wil= l be '/mnt/removable4/sergei/build_work/build/Gtk2-1.121/make.log' build.pl executing =3D=3D> cd /mnt/removable4/sergei/build_work/build/Gtk= 2-1.121; PATH=3D/mnt/removable4/sergei/build_work/install/Glib-1.120/bin:/mnt/remo= vable4/sergei/build_work/install/atk-1.10.3/bin:/mnt/removable4/sergei/bu= ild_work/install/cairo-1.0.4/bin:/mnt/removable4/sergei/build_work/instal= l/glib-2.10.1/bin:/mnt/removable4/sergei/build_work/install/gtk+-2.8.17/b= in:/mnt/removable4/sergei/build_work/install/pango-1.12.1/bin:/usr/sbin:/= sbin:/usr/local/bin:/usr/bin:/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin/= :/usr/games:/ibm/home/sergei/bin:/usr/lib/ssh; export PATH; make 1>make.log 2>&1 build.pl :ERROR: 'make' for 'Gtk2' target failed, see '/mnt/removable4/sergei/build_work/build/Gtk2-1.121/make.log' log file fo= r details " --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-30 02:30:43
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #8 from muppet 2006-05-30 02:30 UTC ------- (In reply to comment #7) > I am not sure I understand "where you are heading". I was suggesting that you extend your script to support the PERL5LIB environment variable when dealing with perl modules. So far, most of the= bugs you've logged have boiled down to problems stemming from the fact that th= is variable is not set. You don't have to set it in your environment as a user. The build script should be able to manage this variable just as it manages PATH, LD_LIBRARY_PATH, and PKG_CONFIG_PATH, and it should create wrapper script= s that set up the correct environment before running client programs. (You'd ha= ve to do something like this second step even if you used -I switches instead.) > No, I'm not using PERL5LIB environment variable - after working for A V= ery > Well Known Semiconductor Company which used to have development environ= ment > with more than 400 environment variables, and the environment couldn't = fit > into standard shells, and they had to recompile them from scratch, and = I > had mysterious failure which could be reproduced only adding apparently > unrelated environment varibales (i.e. the failured were to environment = overlap > or screwup) I have a very strong to environment variables. Indeed, that sounds like a messed-up system. But just because one system completely misuses a very important feature of unix doesn't mean that fea= ture is crack-fueled and should never be used. Either extreme is bad; life is= good when all things are taken in moderation. Using PERL5LIB will make your l= ife much easier. > For me usage of environment variables is an indication that no decent > mechanism was thought of. After having to go through 50 perl scripts and change the -I options on a= ll of the shebang lines in order to handle a library upgrade, i have decided th= at environment variables are the perfect solution for this problem. Just by altering the PERL5LIB variable, and making no code changes whatsoever (including scripts that call other scripts), i can point my perl programs= at a different implementation of library code for quick and easy A/B testing. If you disagree, fine. If you think i'm just being an uncooperative ass = who won't help because you want me to do more work, please try looking at it = the other way around; i'm sad that you won't take my advice borne of already = having made the mistakes you're making now. > 1) a sh wrapper around Perl in current directory > " > #!/bin/sh -f > /usr/bin/perl5.8.7 -I > /mnt/removable4/sergei/build_work/install/Glib-1.120/lib/perl5/site_per= l/5.8.7/i386-linux > "$@" Do you realize that this is effectively doing the same thing that setting= the PERL5LIB environment variable would've achieved, without any extra fuss? --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-30 02:31:14
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #9 from muppet 2006-05-30 02:31 UTC ------- Since you've found a workaround, and we're down to debating the usefulnes= s of environment variables, can we close this bug? That is, are you still see= ing the crash in POD generation? --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-05-30 03:06:51
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified ------- Comment #10 from Sergei Steshenko 2006-05-30 03:06 UTC ------- Regarding " Do you realize that this is effectively doing the same thing that setting= the PERL5LIB environment variable would've achieved, without any extra fuss? ". No, not quite. That is, I achieve the same functionality, BUT, if my command line become= s too long I at least get an error message from shell. Not so with environment variables. And, as I wrote earlier, I get nothing in case of environment variables. Philosophically speaking I consider both environment variables and search paths (the -I <path> in this case) to be evil, so, whenever possible, I a= m trying to to use the smallest number of evil ways possible with better diagnostics. I.e. if I have to choose environment variables <-> command line, I choose the latter, especially if I do not want child processes to inherit things by default. I am going to use PERL5LIB in the final stage when I have to run the stuf= f. That is because if I have a Perl script called from a shell by its full path, like '<path>/script.pl', not like 'perl script.pl', then I really = have no other way to tell Perl how to preextend @INC. I am not talking about custom scripts, I'm talking about ready-made scrip= ts I'm not going to change. You can close the bug, thanks for your time and effort. --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |
From: gnome-perl (bugzilla.gnome.org) <bug...@bu...> - 2006-06-17 16:09:06
|
Do not reply to this via email (we are currently unable to handle email responses and they get discarded). You can add comments to this bug at http://bugzilla.gnome.org/show_bug.cgi?id=3D341339 gnome-perl | Gtk2 | Ver: unspecified Torsten Schoenfeld changed: What |Removed |Added -------------------------------------------------------------------------= --- CC| |kaf...@gm... Status|UNCONFIRMED |RESOLVED Resolution| |NOTABUG --=20 Configure bugmail: http://bugzilla.gnome.org/userprefs.cgi?tab=3Demail ------- You are receiving this mail because: ------- You are the QA contact for the bug. You are the assignee for the bug. |