From: <gps...@li...> - 2010-07-28 06:24:04
|
Bugs item #3035762, was opened at 2010-07-28 08:09 Message generated for change (Comment added) made by d_s_e You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=770280&aid=3035762&group_id=148048 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: gpsdrive-2.10pre4 >Status: Closed >Resolution: Fixed Priority: 5 Private: No Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: gps status - no gps Initial Comment: I'm using a Navilock NL-402U usb gps receiver on Ubuntu Lucid Lynx. This works fine with gpsd (Version 2.92), except that gpsdrive-2.10pre4 shows status no gps. Looking at gpsd -nN -D5 -b /dev/ttyACM0 the relevant bit of the output seems to be: gpsd: checking client(0) gpsd: <= client(0): R gpsd: => client(0): = Now to the best of my knowledge the R command is obsoleted and can no longer be used. The correct command to pull nmea gps data from gpsd should be ?WATCH={"enable":true,"nmea":true} ? Can you confirm that this could be the problem (or am I missing something here) and take adequate steps to remedy the situation in all future versions of gpsdrive ? Thanks in advance!!!!! ---------------------------------------------------------------------- >Comment By: D.S.E (d_s_e) Date: 2010-07-28 08:24 Message: Please use a current GpsDrive version: 1. GpsDrive 2.10pre4 is a really old and outdated 2. In gpsd 2.90+ the API has changed, the necessary changes are included in GpsDrive 2.11+ ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=770280&aid=3035762&group_id=148048 |