[gphoto-features] [ gphoto-Feature Requests-783018 ] support for sony dcr-pc110

[SourceForge.net <no...@so...>]

Feature Requests item #783018, was opened at 2003-08-04 21:01
Message generated for change (Comment added) made by dgdaniels
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=358874&aid=783018&group_id=8874

Category: camera support
Group: None
Status: Open
Resolution: None
Priority: 5
Submitted By: Dennis Daniels (dgdaniels)
Assigned to: Nobody/Anonymous (nobody)
Summary: support for sony dcr-pc110

Initial Comment:
After much searching and playing I've discovered the
that the sony dcr-pc110 is not supported under linux :(

sony pc110 is supported but doesn't recognize the 110

additionally usbview does see the device
http://www.kroah.com/linux/usb/


----------------------------------------------------------------------

>Comment By: Dennis Daniels (dgdaniels)
Date: 2003-08-07 17:56

Message:
Logged In: YES 
user_id=403318

Hi, the camera is turned on and plugged in. The output is
identical.

Do I need to tell my RH9 box to go look for it? I thought
rh9 was hotpluggable. I know you are  not RH or USB support
but your assistance would be appreciated

I cked usbview and there are two entries for USB UHCI Root
hubs, both with identical info. I get the impression
something is not right on my box.
Dennis

----------------------------------------------------------------------

Comment By: Hubert Figuiere (hfiguiere)
Date: 2003-08-07 10:01

Message:
Logged In: YES 
user_id=27487

are you sure the camera is plugged in and switched on ? I
don't see it there.

----------------------------------------------------------------------

Comment By: Dennis Daniels (dgdaniels)
Date: 2003-08-07 09:50

Message:
Logged In: YES 
user_id=403318

cat devices
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12 
MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=c800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00
Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12 
MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=c400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00
Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
[root@localhost usb]#


----------------------------------------------------------------------

Comment By: Hubert Figuiere (hfiguiere)
Date: 2003-08-05 09:11

Message:
Logged In: YES 
user_id=27487

what is the content of /proc/bus/usb/devices ?

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=358874&aid=783018&group_id=8874