Hi,
I have a problem with the logscale display on the x axis while
trying to plot data between 1.0 and 1.0E+10
The major and minor ticks on the axis seem to be incorrect.
Example gnuplot script:
#------------------------------------------
set term qt enhanced font "liberation sans,14"
set grid
set logscale xy
set xlabel "Rev"
set pointsize 1
set key font "liberation sans,12"
set xrange [1:1.0E+10]
# set xrange [1:1.0E+09]
# set xrange [1:1.0E+12]
set yrange [0.1:1.0]
set key bottom
set colorbox default
set cbrange [100:700]
set palette #This will reset to default
#input Data format is:
# 0.0010 1 209 814 0000 208920 1 461
set ylabel "Fraction"
plot "temp" u 2:7:8 w lp pt 7
#--------------------------------------------
# the data file "temp" consist of:
#0.0035 1 721 -437 00005 208920 1 461
#0.0035 10 721 -437 00005 208920 0.94 461
#0.0035 100 721 -437 00005 208920 0.88 461
0.0035 200 721 -437 00005 208920 0.85 461
0.0035 1000000 721 -437 00005 208920 0.63 461
0.0035 1.0E+10 721 -437 00005 208920 0.47 461
#--------------------------------------
Using an "set xrange [1.0:1.0E+09 ]" will display correctly.
Anything over 1.0E+10 causes problems.
Note that the data seems to be plotting correctly in the grid.
It seems to be only an axis tick problem.
best regards,
Al
|
