#1 add Nomad MuVo support

[Anonymous]

Gnomadic is the only (working) program I've seen that
has re-encoding included with the file transfer which
is why I would like gnomadic to work with the Creative
Nomad MuVo.... I assume you don't own one - so here is
all the info I have on the MuVo... (maybe this will help)

muvo uses fat16 format and is often mounted under
/mnt/muvo or /mnt/flash (/dev/sda1)

Thanks,
Chris McBride

Nomad MuVo with Linux

- requires firmware update to at least 1.20 (1.40.12
recommended)
- firmware must be updated under Windows XP or 2000
(http://www.nomadworld.com/ -> downloads -> firmware ->
Firmware for NOMAD MuVo)
- my MuVo works best when formatted under Windows (FAT16)
- do not use creative formatter after firmware update,
format using windows as FAT16 drive

=================================================

- when removing files from MuVo be sure to empty trash....
- sometimes the MuVo may lock up when doing a file
transfer (may need to reboot computer)
- use the ALSA audio driver (if possible) in xmms to
prevent audio skipping while mounted

=================================================

as root:
mkdir /mnt/muvo
chmod 777 /mnt/muvo

add to /etc/fstab
/dev/sda1 /mnt/muvo vfat
noauto,owner,users 0 0

=================================================

mount with:
mount -t vfat /dev/sda1 /mnt/muvo

=================================================

alternate mounting method.....
Data stored on MuVo can be accessed after mounting
partition /devices/scsi/host0/bus0/target0/lun0/part1
(see cat /proc/scsi/scsi for ID #):
mount -t vfat
/devices/scsi/host0/bus0/target0/lun0/part1 /mnt/muvo/

Or you can put a line in the /etc/fstab to allow the
users mounting MuVo:
/devices/scsi/host1/bus0/target0/lun0/part1 /mnt/muvo
vfat owner,users,noauto,rw 0 0

=================================================

check it with:
cat /var/log/messages
Aug 21 09:46:02 localhost kernel: usb 1-2.4: new full
speed USB device using address 4
Aug 21 09:46:02 localhost kernel: ehci_hcd
0000:00:10.3: qh 15a41280 (#0) state 1
Aug 21 09:46:03 localhost kernel: Initializing USB Mass
Storage driver...
Aug 21 09:46:03 localhost kernel: scsi0 : SCSI
emulation for USB Mass Storage devices
Aug 21 09:46:03 localhost kernel: Vendor: Creative
Model: NOMAD MUVO Rev: 0100
Aug 21 09:46:03 localhost kernel: Type:
Direct-Access ANSI SCSI revision: 02
Aug 21 09:46:03 localhost kernel: SCSI device sda:
255040 512-byte hdwr sectors (131 MB)
Aug 21 09:46:03 localhost kernel: sda: Write Protect is off
Aug 21 09:46:03 localhost kernel: sda: assuming drive
cache: write through
Aug 21 09:46:03 localhost kernel: sda: sda1
Aug 21 09:46:03 localhost kernel: Attached scsi
removable disk sda at scsi0, channel 0, id 0, lun 0
Aug 21 09:46:03 localhost kernel: Attached scsi generic
sg0 at scsi0, channel 0, id 0, lun 0, type 0
Aug 21 09:46:03 localhost kernel: usbcore: registered
new driver usb-storage
Aug 21 09:46:03 localhost kernel: USB Mass Storage
support registered.
Aug 21 09:46:03 localhost kernel: updfstab: Using
deprecated /dev/sg mechanism instead of SG_IO on the
actual device
Aug 21 09:46:04 localhost scsi.agent[2815]: disk at
/devices/pci0000:00/0000:00:10.3/usb1/1-2/1-2.4/1-2.4:1.0/host0/0:0:0:0

=================================================

check it with:
cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Creative Model: NOMAD MUVO Rev: 0100
Type: Direct-Access ANSI SCSI
revision: 02

=================================================

check it with:
dmesg
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Creative Model: NOMAD MUVO Rev: 0100
Type: Direct-Access ANSI SCSI
revision: 02
SCSI device sda: 255040 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
sda: sda1
Attached scsi removable disk sda at scsi0, channel 0,
id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0,
lun 0, type 0
USB Mass Storage device found at 4
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
updfstab: Using deprecated /dev/sg mechanism instead of
SG_IO on the actual device

=================================================

check it with:
cat /proc/bus/usb/devices
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 5
Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64
#Cfgs= 1
P: Vendor=041e ProdID=4106 Rev=14.0c
S: Manufacturer=Creative Tech
S: Product=NOMAD MuVo
S: SerialNumber=000071053754C783
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

=================================================