Re: [Globalplatform-users] GPShell and NXP JCOP 31/36K

[Gina <gi...@rb...>]

Good morning,

On Thu, 2007-07-19 at 20:38 +0200, Karsten Ohme wrote: 
> Gina Häußge schrieb:
> > On Wed, 2007-07-18 at 19:46 +0200, Karsten Ohme wrote:
> >>> The AID of the Card Manager is "a0000000030000", so that is ok.
> >> Mmmh, try a000000003000000 in GP211 mode. a0000000030000 was used for 
> >> former OP2.01' cards. Maybe this helps.
> > 
> > I now managed to get a listing of installed applets, using both AIDs,
> > but still in OP2.01 mode. 
> 
> Both AIDs? How come? This should not work. Great. If you can list the 
> applets, you should also be able to execute other commands. Give the 
> install -file a try.

I did, same as before, "6A88: Referenced data not found". 

> Or try again GP211 mode
> mode_211
> enable_trace
> 
> establish_context
> card_connect
> select -AID a000000003000000
> open_sc -security 0 -keyind 255 -keyver 0 -mac_key 
> 404142434445464748494a4b4c4d4e4f -enc_key 
> 404142434445464748494a4b4c4d4e4f -kek_key 404142434445464748494a4b4c4d4e4f
> 
> -security 0 disables authentication and encryption
> And use key index 255.

Now I get a "mutual_authentication() returns 0x80206A86 (6A86: Incorrect
parameters (P1, P2).)" message *sigh* Guess a try with a version of the
JCOP Tools proven to work would be helpful, so if you could send me your
version like you offered, that would be great! :)

Greetings,
  Gina

-- 
Dipl.-Inform. Gina Häußge
RBG, FB20, TU Darmstadt    Tel: +49 (0)6151 16 6655
Hochschulstr. 10           Fax: +49 (0)6151 16 4701
64289 Darmstadt            S2|02 B120