Re: [Globalplatform-users] JCOP 31 : "Wrong CLA Byte" with GPShell

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Sébastien HASCOAT schrieb:
> I tried what you said. It crashed again (with the same error message)
> when it executes "install_for_install" :

Well, I'm not sure but I would assume that the card does not support the
install_for_install_and_make_selectable command (GPShell calls it
install for install). Hope the card is not buggy.

execute a send_apdu -APDU command (see the README) and execute only a
install_for_install command, could be this:

80E604002C09A00000006203010C010AA00000006203010C01010AA00000006203010C0101010208C900EF04C80207D00000

If you can read the GP 2.1.1 spec p. 120 for the syntax of the install
for install command. After this execute install_for_make_selectable. But
the first step is important. Try if it works. After this we can continue.

Regards,
Karsten

> 
> <code>
> mode_211
> enable_trace
> establish_context
> card_connect
> * reader name OMNIKEY CardMan 5x21 0
> select -AID a000000003000000
> Command --> 00A4040008A000000003000000
> Wrapped command --> 00A4040008A000000003000000
> Response <-- 6F108408A000000003000000A5049F6501FF9000
> open_sc -security 1 -keyind 0 -keyver 0 -mac_key
> 404142434445464748494a4b4c4d4e4
> f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
> Command --> 80CA006600
> Wrapped command --> 80CA006600
> Response <--
> 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
> 886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104012
> A026E01029000
> Command --> 8050000008FB40E98F53D10FB900
> Wrapped command --> 8050000008FB40E98F53D10FB900
> Response <-- 00007115001731911702FF020023A368E8D9A4CEB77CEF48A7257CE39000
> Command --> 8482010010A3941602DF12AD128CDD3370FAEAB2E6
> Wrapped command --> 8482010010A3941602DF12AD128CDD3370FAEAB2E6
> Response <-- 9000
> delete -AID a00000006203010c01
> Command --> 80E400800B4F09A00000006203010C0100
> Wrapped command --> 84E40080134F09A00000006203010C01A3FEC982667FD10000
> Response <-- 009000
> delete -AID a00000006203010c0101
> Command --> 80E400800C4F0AA00000006203010C010100
> Wrapped command --> 84E40080144F0AA00000006203010C01016A24CEB03866787100
> Response <-- 6A88
> delete_applet() returns 0x80206A88 (6A88: Referenced data not found.)
> install_for_load -pkgAID a00000006203010c01 -nvCodeLimit 500  -sdAID
> A0000000030
> 00000
> Command -->
> 80E602001C09A00000006203010C0108A0000000030000000006EF04C60202000000
> 
> Wrapped command -->
> 84E602002409A00000006203010C0108A0000000030000000006EF04C602
> 020000D2BE4CCB4DD0728F00
> Response <-- 009000
> load -file HelloWorld.cap
> file name HelloWorld.cap
> Command -->
> 80E80000EFC482019B010013DECAFFED010204000109A00000006203010C0102001F
> 0013001F000E000B0036000C0067000A00130000006C00000000000001010004000B01000107A000
> 000062010103000E010AA00000006203010C0101001406000C00800301000107010000001F070067
> 000210188C000118110100900B8700188B00027A02308F00033D8C00043B7A0523198B00052D198B
> 00063203290470191A08AD0016041F8D000B3B16041F41290419088B000C321F64E8198B00073B19
> 160408418B00081903088B000919AD000316048B000A7A08000A0000000000000000000005003600
> 0D020000000680030003
> Wrapped command -->
> 84E80000F7C482019B010013DECAFFED010204000109A00000006203010C
> 0102001F0013001F000E000B0036000C0067000A00130000006C00000000000001010004000B0100
> 0107A000000062010103000E010AA00000006203010C0101001406000C0080030100010701000000
> 1F070067000210188C000118110100900B8700188B00027A02308F00033D8C00043B7A0523198B00
> 052D198B00063203290470191A08AD0016041F8D000B3B16041F41290419088B000C321F64E8198B
> 00073B19160408418B00081903088B000919AD000316048B000A7A08000A00000000000000000000
> 050036000D0200000006800300039B6701C59F56FE16
> Response <-- 009000
> Command -->
> 80E88001B0800301010000000600000103800A0103800A0603800A0703800A090380
> 0A0403800A050680100203800A0309001300030E252C000C050C06040805100C080906090B006C01
> 0001000000000100030002000000001C00840001001E001100000000010900140030000900000000
> 0701001F0033004600000000000D001C001E001EFFFF001E001C00200020002200240027002A002E
> 01B001100140024103441004B44106B4B444024404B431066800A100
> Wrapped command -->
> 84E88001B8800301010000000600000103800A0103800A0603800A070380
> 0A0903800A0403800A050680100203800A0309001300030E252C000C050C06040805100C08090609
> 0B006C010001000000000100030002000000001C00840001001E0011000000000109001400300009
> 000000000701001F0033004600000000000D001C001E001EFFFF001E001C00200020002200240027
> 002A002E01B001100140024103441004B44106B4B444024404B431066800A1E03B1BB7C344926800
> 
> Response <-- 009000
> install_for_install -priv 02 -AID a00000006203010c0101 -pkgAID
> a00000006203010c0
> 1 -instAID a00000006203010c0101 -nvDataLimit 2000
> Command -->
> 80E60C002C09A00000006203010C010AA00000006203010C01010AA0000000620301
> 0C0101010208C900EF04C80207D00000
> Wrapped command -->
> 84E60C003409A00000006203010C010AA00000006203010C01010AA00000
> 006203010C0101010208C900EF04C80207D00051B416B12A1AC3D100
> Response <-- 6E00
> install_for_install_and_make_selectable() returns 0x80206E00 (6E00:
> Wrong CLA by
> te.)
> </code>
> Do you think it is a problem in GPShell or in the card ? :s 
> Thank you again !
> Sébastien
> 
> 
> 2008/12/14 Karsten Ohme <wid...@t-...
> <mailto:wid...@t-...>>
> 
>     Sébastien HASCOAT schrieb:
>     > Hello Karsten,
>     > Thank you for your answer. I tried both options but none worked :( I
>     > really don't understand why, i'm lost...
>     > If you have another idea i could try... I'll continue thinking
>     about it
>     > too !
> 
>     Try to execute the three steps on it own. See the file
>     helloInstallCFlex ...
> 
>     install_for_load
>     load_
>     install_for ...
> 
>     Regards,
>     Karsten
>     > I thought about trying JCOP Tools but it's impossible to find now.
>     > Have a nice day,
>     > Sébastien Hascoat
>     >
>     > 2008/12/14 Karsten Ohme <wid...@t-...
>     <mailto:wid...@t-...>
>     > <mailto:wid...@t-... <mailto:wid...@t-...>>>
>     >
>     >     Sébastien HASCOAT schrieb:
>     >     > Hello,
>     >     > I have a problem when i try to install an applet on a
>     JCOP31/72k Card.
>     >     > I've seen that many people had this problem, but i didn't
>     find the
>     >     solution.
>     >     > I tried with the samples provided with GPShell (version 1.4.2) :
>     >     > helloInstallGP211.txt and i get this error :
>     >     >
>     >     > install_for_install_and_make_selectable() returns 0x80206E00
>     (6E00:
>     >     > Wrong CLA byte.)
>     >     >
>     >     > Here is the log :
>     >     >
>     >     > mode_211
>     >     > enable_trace
>     >     > establish_context
>     >     > card_connect
>     >     > * reader name OMNIKEY CardMan 5x21 0
>     >     > select -AID a000000003000000
>     >     > Command --> 00A4040008A000000003000000
>     >     > Wrapped command --> 00A4040008A000000003000000
>     >     > Response <-- 6F108408A000000003000000A5049F6501FF9000
>     >     > open_sc -security 1 -keyind 0 -keyver 0 -mac_key
>     >     > 404142434445464748494a4b4c4d4e4f -enc_key
>     >     > 404142434445464748494a4b4c4d4e4f // Open secure channel
>     >     > Command --> 80CA006600
>     >     > Wrapped command --> 80CA006600
>     >     > Response <--
>     >     >
>     >    
>     664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104012A026E01029000
>     >     > Command --> 805000000811D03CEEB05ED33400
>     >     > Wrapped command --> 805000000811D03CEEB05ED33400
>     >     > Response <--
>     >     00007115001731911702FF020003AD669A479C52DD1284247BEC64ED9000
>     >     > Command --> 8482010010F82A9987D172FB7A6CDD05CB5E928AF3
>     >     > Wrapped command --> 8482010010F82A9987D172FB7A6CDD05CB5E928AF3
>     >     > Response <-- 9000
>     >     > delete -AID a00000006203010c0101
>     >     > Command --> 80E400800C4F0AA00000006203010C010100
>     >     > Wrapped command -->
>     >     84E40080144F0AA00000006203010C0101B37CC15990CDB33600
>     >     > Response <-- 6A88
>     >     > delete_applet() returns 0x80206A88 (6A88: Referenced data
>     not found.)
>     >     > delete -AID a00000006203010c01
>     >     > Command --> 80E400800B4F09A00000006203010C0100
>     >     > Wrapped command -->
>     84E40080134F09A00000006203010C014688AF21D63AA08A00
>     >     > Response <-- 009000
>     >     > install -file HelloWorld.cap -nvDataLimit 2000 -instParam 00
>     -priv 2
>     >     > file name HelloWorld.cap
>     >     > Command -->
>     >     >
>     >    
>     80E602002009A00000006203010C0108A000000003000000000AEF08C60201A8C80207D00000
>     >     > Wrapped command -->
>     >     >
>     >    
>     84E602002809A00000006203010C0108A000000003000000000AEF08C60201A8C80207D000C5518324E192FB5100
>     >     > Response <-- 009000
>     >     > Command -->
>     >     >
>     >    
>     80E80000EFC482019B010013DECAFFED010204000109A00000006203010C0102001F0013001F000E000B0036000C0067000A00130000006C00000000000001010004000B01000107A000000062010103000E010AA00000006203010C0101001406000C00800301000107010000001F070067000210188C000118110100900B8700188B00027A02308F00033D8C00043B7A0523198B00052D198B00063203290470191A08AD0016041F8D000B3B16041F41290419088B000C321F64E8198B00073B19160408418B00081903088B000919AD000316048B000A7A08000A00000000000000000000050036000D020000000680030003
>     >     > Wrapped command -->
>     >     >
>     >    
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
>     >     > Response <-- 009000
>     >     > Command -->
>     >     >
>     >    
>     80E88001B0800301010000000600000103800A0103800A0603800A0703800A0903800A0403800A050680100203800A0309001300030E252C000C050C06040805100C080906090B006C010001000000000100030002000000001C00840001001E0011000000000109001400300009000000000701001F0033004600000000000D001C001E001EFFFF001E001C00200020002200240027002A002E01B001100140024103441004B44106B4B444024404B431066800A100
>     >     > Wrapped command -->
>     >     >
>     >    
>     84E88001B8800301010000000600000103800A0103800A0603800A0703800A0903800A0403800A050680100203800A0309001300030E252C000C050C06040805100C080906090B006C010001000000000100030002000000001C00840001001E0011000000000109001400300009000000000701001F0033004600000000000D001C001E001EFFFF001E001C00200020002200240027002A002E01B001100140024103441004B44106B4B444024404B431066800A16FC7CE2D558E8BAA00
>     >     > Response <-- 009000
>     >     > Command -->
>     >     >
>     >    
>     80E60C002D09A00000006203010C010AA00000006203010C01010AA00000006203010C0101010209C90100EF04C80207D00000
>     >     > Wrapped command -->
>     >     >
>     >    
>     84E60C003509A00000006203010C010AA00000006203010C01010AA00000006203010C0101010209C90100EF04C80207D0004B24280302CB968A00
>     >     > Response <-- 6E00
>     >     > install_for_install_and_make_selectable() returns 0x80206E00
>     (6E00:
>     >     > Wrong CLA byte.)
>     >     >
>     >     >
>     >     > I am sure it is a simple thing but i really can't find where
>     ! I have
>     >
>     >     Maybe it is not so easy. The message CLA byte wrong is
>     rubbish. I cannot
>     >     see the reason. It is correct. The CLA byte is the first byte.
>     Here 84.
>     >     80 is the standard CLA byte for a GP command. The 4 means that
>     a secure
>     >     channel is used. Try to pass to open_sc -security 3 or security 0
>     >     instead of -security 1. Let's see what happens. But I don't
>     think this
>     >     is the problem.
>     >
>     >     The install command command executes in three steps:
>     >
>     >     install_for_load starting with 80 E6 02
>     >     load 80 E8
>     >     install_for_install_and_make_selectable = 80 E6 0C ...
>     >
>     >     This look correct in the trace.
>     >
>     >     If the change of the security parameter changes the behavior
>     there is a
>     >     bug on some side.
>     >
>     >     Regards,
>     >     Karsten
>     >
>     >     > the same error with my own applets then i suppose it will solve
>     >     > everything if somebody can tell me where is the problem :)
>     >     > Thank you very much for your help !
>     >     > Sebastien
>     >     >
>     >     >
>     >     >
>     >    
>     ------------------------------------------------------------------------
>     >     >
>     >     >
>     >    
>     ------------------------------------------------------------------------------
>     >     > SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las
>     >     Vegas, Nevada.
>     >     > The future of the web can't happen without you.  Join us at
>     MIX09
>     >     to help
>     >     > pave the way to the Next Web now. Learn more and register at
>     >     >
>     >    
>     http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
>     >     >
>     >     >
>     >     >
>     >    
>     ------------------------------------------------------------------------
>     >     >
>     >     > _______________________________________________
>     >     > Globalplatform-users mailing list
>     >     > Glo...@li...
>     <mailto:Glo...@li...>
>     >     <mailto:Glo...@li...
>     <mailto:Glo...@li...>>
>     >     >
>     https://lists.sourceforge.net/lists/listinfo/globalplatform-users
>     >
>     >
>     >
>     >
>     ------------------------------------------------------------------------
>     >
>     >
>     ------------------------------------------------------------------------------
>     > SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las
>     Vegas, Nevada.
>     > The future of the web can't happen without you.  Join us at MIX09
>     to help
>     > pave the way to the Next Web now. Learn more and register at
>     >
>     http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/
>     >
>     >
>     >
>     ------------------------------------------------------------------------
>     >
>     > _______________________________________________
>     > Globalplatform-users mailing list
>     > Glo...@li...
>     <mailto:Glo...@li...>
>     > https://lists.sourceforge.net/lists/listinfo/globalplatform-users
> 
> 

Re: [Globalplatform-users] JCOP 31 : "Wrong CLA Byte" with GPShell

Implementation of GlobalPlatform smart card specification

Re: [Globalplatform-users] JCOP 31 : "Wrong CLA Byte" with GPShell